Hello everyone

I have a problem with my new Nvidia vanta lt(riva TNT2 ??) drivers.
i downloaded drivers NVIDIA_GLX-1.0-2960.tar.gz ; NVIDIA_KERNEL-1.0-2960.tar.gz
and installed them. however, after configuring my XF86Config-4 - changing in section Driver "nv" to "nvidia", when X starts screen blinks for few seconds and X turn off.
my kernel is 2.4.22.
in Xfree86.0.log I found:


(II) Loading extension RECORD(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.2960
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-2960 Tue May 14 07:45:20 PDT 2002
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS,
GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
GeForce4 MX 440, GeForce4 MX 420, Quadro4 500/550 XGL,
Quadro4 200/400 NVS, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500,
Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, GeForce2 Go,
GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M,
GeForce4 440 Go 64M, Quadro4 500 GoGL
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset Vanta found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[8] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B](B)
[9] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000dfa0 - 0x0000dfa7 (0x IX[B]
[13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xdfff0000 - 0xdfffffff (0x10000) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[8] -1 0 0xda000000 - 0xdbffffff (0x2000000) MX[B](B)
[9] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000dfa0 - 0x0000dfa7 (0x IX[B]
[16] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "SWcursor"
(--) NVIDIA(0): Linear framebuffer at 0xDA000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(EE) NVIDIA(0): Failed to initialize the NVdriver kernel module!
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
----------------------------------------------------------------

from syslog i get the following information:

Knoppix kernel: 0: nvidia: Can't find an IRQ for your NVIDIA card!
Knoppix kernel: 0: nvidia: Please check your BIOS settings.
Knoppix kernel: 0: nvidia: [Plug & Play OS ] should be set to NO
Knoppix kernel: 0: nvidia: [Assign IRQ to VGA] should be set to YES
Knoppix kernel: 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
------------------------------------------------------------------
I found out that module loads with warnings, maybe something goes wrong with IRQ, where could I find appropriate IRQ for my card, in BIOS I could find nothing.

I tried to instal driver from NVIDIA-Linux-x86-1.0-4496-pkg2.run but nothing changes
However the same situation happens when on my Win98 when I install AGP drivers for my motherboard "PCchips m726", with one difference that windows hangs up.

Thanks for any suggestions from you.