Install nvidia drivers ....
Use the search option from knoppix site to have more info on how to install ....
I have a very weird problem here; I have two systems here at home, one (A) is an athlon 1.4Ghz on a ECS K7S5A (rev.3) mobo with 256Mb of (good, Nanya) DDR-ram, a Creative sb128 (onboard audio has way too low output for my amp), a GeForce 2 ti, a 80Gb Western Digital hd on the first IDE controller and two optical drives on the secondary IDE controller.
The other system (B), my brothers actually, is basically the same; same mobo, bios version and settings. The difference is that it's got a 1Ghz athlon, 256Mb of (cheap but good) generic SD-ram (mobo supports both kinds of ram), a smaller hd, a GeForce FX5200 and no PCI soundcard.
So I recently upgraded from a GeForce 2 mx400 to a FX5200 because the old card had gone bad (prolly bad memory) and, guess what, can't run Knoppix anymore, at least not with X...
So far I have tried "xmodule=fbdev/vesa", tried to specify the screen resolution and refresh rate, "nodcc" and whatnot but Knoppix always hangs at the point where it should start the x-server. BTW, "failsafe" brought me a little futher; it looks like the x-server is actually being started but after a couple screen refreshs it says "no suitable x-server found" or something like that.
I'm really running out of ideas here, I mean I could always plug in another graphics card but thats not really the solution I'm looking for. And it's not the bios settings either; I made sure to disable acpi as I know that it causes data corruption, IDE devices not being found and all kinds of funny stuff depending on kernel version on this mobo...
anyway, I NEED HELP! any idea appreciated!
p.s.: has anybody else noticed that the syslinux prompt is all blue on the ECs K7S5A? Looks ok on any other system I've run knoppix on though![]()
Install nvidia drivers ....
Use the search option from knoppix site to have more info on how to install ....
Is this really the only route to go? I thought the generic "nv"-driver that comes with X should be good for all nvidia cards, though it's not accelerated?! Er, nevermind, its not listed on the xfree site, so.. But fbdev should still be ok for unsupported cards, right?Originally Posted by ktheking
Well, that doesn't really help me much but I'll see if I have some remaster around that includes nvidia drivers.
Thanks anyway!
Just booted http://www.slax.org on the machine and X magically works fine here. No nvidia drivers included, just confused the heck out of me![]()

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
NEW DELL TRUSTED PLATFORM MODULE TPM 2.0 POWEREDGE T430 T630 G13 SERVERS K98XH
$225.00
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60
Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99
HPE Synergy 480 Gen10 Blade Server BAREBONES NO CPU, RAM OR HDD 🚚
$140.00
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD
$349.99
NEW DELL TRUSTED PLATFORM MODULE TPM 2.0 POWEREDGE R730 SERVER M48YR RXW6R K98XH
$225.00
Supermicro 938-16 16-LFF MicroCloud SuperServer 5038MR-H8TRF *No Blade Servers*
$159.99