What exactly are you typing?
Yup, i even tried using insmod, same error.
What exactly are you typing?
#!/bin/bash
rmmod cs4232
rmmod ad1848
rmmod uart401
rmmod opl3
modprobe cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=5 synthirq=-1 synthio=-1
modprobe opl3 io=0x388
thats saved as /etc/init.d/soundscript
with a symbolic link at /etc/rc5.d/s98soundscript
It works fine when I run it from the script from konsole, I dont understand whats going wrong.
One question and one point.
Firstly, did you make /etc/init.d/SoundScript executable?
Secondly, the symbolic link should be to called S98whatever, not s98.....
I think that the capitalisation does make a difference.
--
TimW
I changed the chmod and chown to match the other scripts, heres an output of ls -l:
-rwxr-xr-x 1 root root 1785 Nov 24 2001 smartsuite
-rwxr-xr-x 1 root root 179 May 8 21:47 soundscript
I renamed s98soundscript to S98soundscript, but that hasnt fixed it. Im pretty sure its executing because im gettin the errors when it boots up. I'll reboot now and try and jot them down.
This is the output from the soundscript (when called from rc5.d)
Code:rmmod: module cs4232 not loaded rmmod: module ad1848 not loaded rmmod: module uart401 not loaded ad1848/cs4232 codec driver Copyright ....... ad1848: No ISAPnP cards found, trying standard ones... cs4232: set synthio and synthirq to use wavefront facilities. YM3812 and OPL-3 driver Copyright ......
I fixed it. I commented out cs4232 and opl3 in /etc/modules, I may have added them while trying to fix the sound in the past. Im still gettin that error, but kmix (and the sound) are now working.
Thanks for the help
What those messages are saying (well, the first 3 at least) is that the rmmod part of the script isn't needed as modules haven't been loaded.
So you could comment that bit out of the script.
I think the other bits are output from the modules loading (not sure though).
Glad to see someone else went through all the conf.modules stuff unsuccessfully too. <g> I spent ages trying to get it to work in the correct fashion.
Ahh, I dont believe it, its messed up.
I had it working, but without changing anything (apart from apt-get upgrade and dist-upgrade), it now plays all sound/music about 1/4 the speed.
I think the upgrade updated kmix (it now has two tabs, input and output), but now it plays everything in 1/4 the speed (mp3s, music from games, etc). In noatun the playing time goes by slowly too.
Are you gettin the same problem? Im quite sure I didnt change anything with the soundscript, etc, since the problem started, only updating kmix.
I only bother using sound through xmms, and I use aumixer rather than kmix (try to avoid kde as much as possible).
However, everything seems fine here.
My last update of packages was Thursday night...
--
TimW

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)
$399.95
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$484.99
Dell PowerEdge R730 8 Bay Server 64Gb 1x80Gb SSD 3x900Gb SAS 2x12c v4CPU Proxmox
$620.00
8W81F Dell PowerEdge R840 24x SFF 4x Xeon Gold 6252 H730P 2x 1100W PSU
$1000.00
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50
Dell Poweredge C4130 2x LGA2011-3 1U 4x GPU Rackmount Server CTO (NO CPU/NO RAM)
$299.95