-
Junior Member
registered user
Internet Config?
I'm a bit scared to configure my internet for Knoppix.. even though the people at Accesscomm (where I get my net from) said that the connection would reset to my XP when I restart.
I have:
My XP (where I will be running Knoppix from, also using it for XP alot)
A Windows 98 tower hooked up to my XP
Another XP (my sister's)
Two laptops (occasionally plugged in)
The problem is that I use a router, and I'm concerned that the 98, otehr XP, or laptops will be unable to run internet when I configure it to Knoppix, and that I don't know for certain if it will reset the internet configurations for Windows XP.
Please help me if you can.. I'd be very grateful
-
Senior Member
registered user
Eh?
Your router gives each machine a dynamic internal IP address via DHCP unless you staticly assign addresses through windows. Booting Knoppix on your LAN will not make any of the other machines lose their connection. It will not change the windows networking settings of the computer you boot it on either. It will just ask your router to assign it a dynamic IP address and if there is a driver for your network card on the Knoppix CD, it will just work automagically. You don't have to configure anything.
-
Junior Member
registered user
If there is a driver on the CD, will it work right when I boot it up on Knoppix? Because I tried before, and I couldn't get onto GAIM.. and the guy that gave me the CD said that I would need to configure my net...
-
Senior Member
registered user
You'll probably need to configure your nic. If the router is handling DHCP, that should be it.
-
Junior Member
registered user
I kno I'll probably sound stupid, but what's nic? I'm really new to Knoppix.. and I've never had need to set up my net..
-
Senior Member
registered user
NIC = network interface card. It's the card which your ethernet cable plugs into.
Similar Threads
-
By algernon in forum General Support
Replies: 3
Last Post: 10-11-2004, 11:29 PM
-
By Xpiral in forum Networking
Replies: 6
Last Post: 03-09-2004, 11:36 AM
-
By treo in forum General Support
Replies: 0
Last Post: 10-25-2003, 05:47 PM
-
By hawgs74 in forum General Support
Replies: 1
Last Post: 10-01-2003, 05:34 PM
-
By bongski55 in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 09-06-2003, 05:58 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R720 8SFF 2.5" x Xeon E5-2680 v2 2.8GHz 20-Cores 128gb 4x Trays
$349.99

Dell PowerEdge R730XD Server 2x E5-2695 V4 = 36 Cores H730p 32GB RAM 4x trays
$649.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Poweredge R720 8SFF 2.5" 2x Xeon E5-2680 v2 2.8GHz 20-Cores 64gb 4x Trays
$259.99

Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5" 4-BAY 32GB RAM No OS 2x 495w
$174.95

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R620 Dual Intel Xeon E5-2640 v2 @2.00GHz 192GB RAM No HDD H710P
$250.00

Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w
$359.99

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

DELL R640 10SFF Server 2x Gold 6152 2.1GHz =44 Cores 64GB H730p 4xRJ45
$959.00