-
Junior Member
registered user
Internet Config?
I'm a bit scared to configure my internet for Knoppix.. even though the people at Accesscomm (where I get my net from) said that the connection would reset to my XP when I restart.
I have:
My XP (where I will be running Knoppix from, also using it for XP alot)
A Windows 98 tower hooked up to my XP
Another XP (my sister's)
Two laptops (occasionally plugged in)
The problem is that I use a router, and I'm concerned that the 98, otehr XP, or laptops will be unable to run internet when I configure it to Knoppix, and that I don't know for certain if it will reset the internet configurations for Windows XP.
Please help me if you can.. I'd be very grateful
-
Senior Member
registered user
Eh?
Your router gives each machine a dynamic internal IP address via DHCP unless you staticly assign addresses through windows. Booting Knoppix on your LAN will not make any of the other machines lose their connection. It will not change the windows networking settings of the computer you boot it on either. It will just ask your router to assign it a dynamic IP address and if there is a driver for your network card on the Knoppix CD, it will just work automagically. You don't have to configure anything.
-
Junior Member
registered user
If there is a driver on the CD, will it work right when I boot it up on Knoppix? Because I tried before, and I couldn't get onto GAIM.. and the guy that gave me the CD said that I would need to configure my net...
-
Senior Member
registered user
You'll probably need to configure your nic. If the router is handling DHCP, that should be it.
-
Junior Member
registered user
I kno I'll probably sound stupid, but what's nic? I'm really new to Knoppix.. and I've never had need to set up my net..
-
Senior Member
registered user
NIC = network interface card. It's the card which your ethernet cable plugs into.
Similar Threads
-
By algernon in forum General Support
Replies: 3
Last Post: 10-11-2004, 11:29 PM
-
By Xpiral in forum Networking
Replies: 6
Last Post: 03-09-2004, 11:36 AM
-
By treo in forum General Support
Replies: 0
Last Post: 10-25-2003, 05:47 PM
-
By hawgs74 in forum General Support
Replies: 1
Last Post: 10-01-2003, 05:34 PM
-
By bongski55 in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 09-06-2003, 05:58 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU
$11.00

Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS
$239.99

Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA
$350.48

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS
$179.98

Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS
$84.49

DELL Precision 5820 Workstation Xeon W-2123 3.6ghz/NO RAM/NO SSD/P400 Vid
$139.99

Dell Precision T7820 2x Xeon Gold 6130 2.10GHz 950W No RAM GPU HDD 4x SATA
$374.48

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

DELL Precision T3420 | Xeon 1240v6 | 525GB SSD |16GB RAM |Nvidia GPU |Win11
$149.00