-
Junior Member
registered user
VGA display mode codes
I have Knoppix 3.1 loaded on an old Toshiba 300CDT laptop - it's on loan - and no we can't get Knoppix 3.3 on it. Slow (only 80Mb) but usable, even with OpenOffice 1.1.0. There was a problem with the display during boot, because Knoppix defaults to 1024x768 and I only have 800x600. This was OK until the root partition glitched in a file-system check and I could not read the bottom of the screen to find out what was happpening, or enter any commands (except by guesswork). I fixed this by changing the VGA code in 'lilo.conf' from 791 to either NORMAL or 0x0103 (800x600x256). Both produced the same display, 80x25 on the central 50% or so of the screen, but without the penguin at the top left.
However, what I would like to do, if possible, is have the neat display that goes with VGA=791, but in an 800x600 space. Is there a VGA display code that will do this?
-
Senior Member
registered user
Re: VGA display mode codes

Originally Posted by
Nadrach
I have Knoppix 3.1 loaded on an old Toshiba 300CDT laptop - it's on loan - and no we can't get Knoppix 3.3 on it. Slow (only 80Mb) but usable, even with OpenOffice 1.1.0. There was a problem with the display during boot, because Knoppix defaults to 1024x768 and I only have 800x600. This was OK until the root partition glitched in a file-system check and I could not read the bottom of the screen to find out what was happpening, or enter any commands (except by guesswork). I fixed this by changing the VGA code in 'lilo.conf' from 791 to either NORMAL or 0x0103 (800x600x256). Both produced the same display, 80x25 on the central 50% or so of the screen, but without the penguin at the top left.
However, what I would like to do, if possible, is have the neat display that goes with VGA=791, but in an 800x600 space. Is there a VGA display code that will do this?
Yes there is you want 788.
Code:
Screen 640x480 800x600 1024x768 1280x1024 1600x1200
Colors --------------------------- -------------------------------------------
256 | 769 771 773 775 796
32,768 | 784 787 790 793 797
65,536 | 785 788 791 794 798
16.8M | 786 789 792 795 799
-
Junior Member
registered user
Yay! Works! Thank you very much!
Similar Threads
-
By lbenn in forum Hardware & Booting
Replies: 5
Last Post: 06-02-2005, 03:13 PM
-
By samhainbaphomet in forum The Lounge
Replies: 2
Last Post: 01-12-2005, 03:42 AM
-
By downdogWoof in forum General Support
Replies: 2
Last Post: 11-07-2004, 03:57 PM
-
By proto in forum General Support
Replies: 2
Last Post: 03-14-2004, 10:04 PM
-
By kzaty in forum Customising & Remastering
Replies: 3
Last Post: 04-29-2003, 08:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack)
$1599.95

867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$225.00

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1625.00

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Microsoft Windows Server 2025 Standard 64bit 32 Core-50 CALs DVD With Key Sealed
$95.99

RDS CAL - Remote Desktop Services Windows Server 2019 50 User/Device Connections
$63.00