-

Originally Posted by
champagnemojo
First of all, really nice instructions. I still don't completely understand the LILO step to load the 2.4 kernel. All you had to do was run /sbin/lilo -v without any changes to lilo.conf and it was set back to boot 2.4? Or did you have to uncomment the two lines that Stephen mentioned? I might install it again using both of your instructions...if nothing else, for a learning experience.
Also, do you notice a big improvement with the 2.6 kernel? I can't get my netcard working on my 2.6 install, but I've messed around with it a little. I noticed that it booted quicker. Are there other benefits you've noticed?
I did not have to uncomment out those lines Stephen mention. doing a more /install-drive/etc/lilo.conf both the prompt and timeout commands were already live (i.e. not commented out) by default. Stephen mentioned that he DID need to uncomment/add those lines. good rule of thumb use the mroe command, if those lines are in lilo.conf leave em alone. if not uncomment or add them as the case dictates. Basically you boot into LinuxOLD (2.4 kernel) after installation becase the initrd image created was "bad". you boot into LinuxOLD just long enough to create a workign one, edit lilo.conf to point to the working initrd you just made then rebbot and 2.6.1 works.
As for your network card is it supported by the 2.6.x kernel? I'm assuming you do have module-init-tools installed, if nto installing that might help. If your card is supported by the kernel AND loading the netcard driver as a module doesn't work try recompiling the kernel and selecting Y instead of M for yoru network card. Or do a google search on linux 2.6 and the name of your network card, see if there's anything that's been posted about it.
I must concurr with Stephen on the improvements in the 2.6 kernel, everything runs much faster, ALSA for lack of a better term "just works" which is something I was losing the battle to in the 2.4 kernel. my USB 2.0 card is now recognized, there's built in support now for PS2 mice.. lots of fun stuff, give it a whirl
Similar Threads
-
By eraserman in forum General Support
Replies: 4
Last Post: 11-04-2004, 07:43 AM
-
By dmpop in forum The Lounge
Replies: 0
Last Post: 10-13-2004, 02:32 PM
-
By Sk83r99 in forum General Support
Replies: 3
Last Post: 08-17-2004, 12:38 AM
-
By naventus in forum Hdd Install / Debian / Apt
Replies: 22
Last Post: 07-17-2004, 05:05 AM
-
By Raj in forum Customising & Remastering
Replies: 1
Last Post: 02-19-2003, 01:19 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88

HPE DL360 G10 CTO Server W/ 2x800W 1x LP PCIE RISER 1xFLEXROM 2XHIGH PERF FANS
$200.00

VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack)
$1599.95

Windows Server 2025 Standard Edition - 24 Core License
$238.00

Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 5120 64GB H330 2x 750w
$538.88

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$484.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 6150 64GB 2x 750w
$499.88

USB 2.0 Network Print Server LAN Print Share Server USB Wireless Print Server
$31.49

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server
$349.99