-
routing problem
Hi,
my Version is Knoppix 3.3 2003-11-19-DE, knx-hdinstall.
My notebook is used at home in a LAN (192.168.0.x) and a gateway 192.168.0.y without problems.
At office in a very paranoid network I have, besides 2 desktops in different subnets, an additional cable with following interface specification:
IP 192.168.47.11
Gateway 81.8.15.253
No Problem with WinXP and AFAIR this was also no problem with Debian-Testing to configure.
But with Knoppix 3.3 I had problems to connect to the large world of WAN.
Here is my /etc/network/interfaces
------snip------
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.47.11
netmask 0.0.0.0
network 0.0.0.0
broadcast 192.168.47.255
gateway 81.8.15.253
-----snip----
After boot no route is visible with route -n
So I do
# route add -net 0.0.0.0 netmask 0.0.0.0 eth0
# route add default gw81.8.15.253 eth0
and everything is ok.
Questions:
1) Is my /etc/network/interfaces wrong configured?
2) What are the relevant scripts to inspect for bugs?
3) Are the scripts original Debian or Knoppix modified? (To whom report errors?)
4) Is there a convenient way/utility to switch per "click" between different network configurations (@home, @office, @wlan, @dhcp ...)?
TIA
Helmut Wollmersdorfer
-
Senior Member
registered user
Re: routing problem

Originally Posted by
wollmersdorfer
Hi,
Here is my /etc/network/interfaces
------snip------
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192.168.47.11
netmask 255.255.255.0
network 192.168.47.0
broadcast 192.168.47.255
gateway 81.8.15.253
-----snip----
Questions:
1) Is my /etc/network/interfaces wrong configured?
2) What are the relevant scripts to inspect for bugs?
3) Are the scripts original Debian or Knoppix modified? (To whom report errors?)
4) Is there a convenient way/utility to switch per "click" between different network configurations (@home, @office, @wlan, @dhcp ...)?
TIA
Helmut Wollmersdorfer
1) Yes see the changes I made above.
2) There are no bugs you put the settings in incorrectly.
3) See answer to 2 for errors and that is a standard file to both.
4) Yes you can have different stanzas in the /etc/network/interfaces for different connections you should take a look at man interfaces and maybe a search of the Debian user mailing list is in order I have seen a few post on there on this topic.
-
@stephen:
sorry, but your configuration will not work.
What you suggest is the same, what I tried first and what is the way I usally configure. But this way you get "network not reachable" for the gateway.
Your answer 4): Yes, I know. I have half a dozen servers running @home, most of them with more than one network interface.
Helmut Wollmersdorfer
Similar Threads
-
By the_squid in forum Networking
Replies: 2
Last Post: 02-14-2005, 10:08 PM
-
By Arsène Lupin in forum Networking
Replies: 10
Last Post: 12-16-2004, 05:05 AM
-
By Nic MFP in forum Networking
Replies: 0
Last Post: 10-18-2004, 10:51 PM
-
By pau1knopp in forum Networking
Replies: 5
Last Post: 02-03-2004, 04:12 PM
-
By ktheking in forum Ideas
Replies: 0
Last Post: 11-04-2003, 02:25 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

IBM System X3850-X5 Server w/4x Intel Xeon E7-4870 CPU , 512 GB DDR3 RAM,NO HDD
$1299.99

IBM QRadar xx29 2x Xeon E5-2650v4 2x 900W PSU M5120 12x 3.5" Bay Server No RAM
$179.99

Unused IBM 09P0037 MAINBOARD For RS/6000 7044-170 P-Series
$375.00

IBM ADP Server Type 7870 AC1 NO HDD | 128GB RAM PC3L | 2 x Xeon E5620
$199.99

IBM Power 8 S822L Server 8247-22L POWER8 Enterprise 256GB RAM 2x 00KV626 CPU
$999.99

Compaq ProLiant 1500R 5/100 rack server, Series 3155, with IBM 2.1GB HD, VINTAGE
$295.00

IBM System x3550 M3 1U Server 2x Xeon E5645, 192GB RAM, 2x 300GB HDD (7944-AC1)
$150.00

IBM SYSTEM X3500 M3 SERVER 7380AC1 TOWER Server XEON E5620 8GB RAID SEE NOTES
$110.30

IBM System X3650 M3 Server Xeon E5620 2.4 GHz 16 GB Ram Raid M5015 No OS No HDD
$87.96

IBM 00FN709 X3850 X6 Compute Book 3837 Barebone
$114.99