-
Can't mount USB drive in knoppix
Linux newbie here trying to get rid of M$.
I cannot seem to get my usb thumb drive to mount in knoppix.
I am running knoppix on a computer that has windows xp and suse 9.0 on a dual-boot hard drive.
when I try to mount it by:
knoppix@ttyp0[knoppix]# sudo sh
knoppix@ttyp0[knoppix]# sudo sh
knoppix@ttyp0[knoppix]# modprobe usb-storage
knoppix@ttyp0[knoppix]# mkdir /mnt/usb
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sda1 /mnt/usb
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdb1 /mnt/usb
mount: /dev/sdb1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdc1 /mnt/usb
mount: /dev/sdc1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdd1 /mnt/usb
mount: /dev/sdd1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sde1 /mnt/usb
mount: /dev/sde1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdf1 /mnt/usb
mount: /dev/sdf1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdg1 /mnt/usb
mount: /dev/sdg1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdh1 /mnt/usb
mount: /dev/sdh1 is not a valid block device
knoppix@ttyp0[knoppix]# mount -t vfat /dev/sdi1 /mnt/usb
mount: special device /dev/sdi1 does not exist
knoppix@ttyp0[knoppix]#
Help.......thanks in advance!
Newbie leaving M$
-
Junior Member
registered user
I'm also quite new, but I have a Kingston Datatraveler USB 2 drive (formatted as FAT32) on Knoppix 3.3 20040209 and all I do is plug it in, and it shows up on the desktop as an scsi hard disk partition.
From there I usually right-click on the partition and select 'mount' and 'change read/write mode'.
Going into the console (as a user, root doesn't seem to be necessary) and typing
mount /dev/sda1
also works for me... I don't remember if that mounts it read-write or not.
In both cases my drive then shows up in either /mnt/sda1/ or /mnt/sdb1/ depending on which port I plug it into.
I just kinda go with what Knoppix wants to do. That said, I've never gotten my USB floppy disk drive to work.
Similar Threads
-
By pubo in forum Hardware & Booting
Replies: 0
Last Post: 06-15-2005, 12:27 PM
-
By glidetothehoop in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 12-24-2004, 02:41 PM
-
By timepilot in forum Hardware & Booting
Replies: 1
Last Post: 12-18-2004, 12:21 AM
-
By hfinger in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-05-2004, 11:10 AM
-
By akiruss in forum General Support
Replies: 3
Last Post: 02-06-2004, 06:42 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP PROLIANT MICROSERVER GEN8 E3-1220LV2 @ 2.30GHz, 8GB RAM, NO HDD/OS
$164.97

Dual Xeon E5-2698 Server-Supermicro X10DRL-i - Noctua SilverStone RM41-506
$449.99

Super Micro 113M-3 Server Intel Xeon 5Tb HDD used great condition
$70.00

HPE ProLiant MicroServer Gen10 Plus Xeon E-2224 3.4GHz 16GB RAM 2TB HDD NO OS
$949.99

HPE ProLiant MicroServer Gen 10 - Opteron x3421 - 16GB DDR4 - 120GB SATA SSD
$350.00

HP ProLiant MicroServer Gen8 Xeon E3-1265L v2 16GB ECC RAM 4-Bay NAS, NO Drives
$300.00

HPE ProLiant MicroServer Gen10 Plus V2 Server G6405 16GB No HDD P54644-001
$899.99

SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays
$499.99

Supermicro 721-2 Mini Tower Black Computer Server NO Hdd
$375.00

BOXX B157552 SuperMicro X10DRT-L 2x Intel 2630V4 NO RAM & SSD Server
$160.99