For goodness sakes DON'T use WD-40! I heard of a person that stuck the nozzle in a hole and blasted the inside of his PC until it made a loud snap and started to smoke! The guy that fixed it said it was dripping when he opened the case!
I have a VAIO 1ghz desktop. Normally when it boots up, the fan revs up during boot, and once Windows starts loading, it calms down to a slower speed. When I try to boot Knoppix, the fan revs up and STAYS like that (really fast and really loud). I dont want to risk damaging the fan while using Knoppix (that, and it is annoying working with a super loud fan). Any help?
For goodness sakes DON'T use WD-40! I heard of a person that stuck the nozzle in a hole and blasted the inside of his PC until it made a loud snap and started to smoke! The guy that fixed it said it was dripping when he opened the case!
Actually he just opened the case and didn't bother fixing it.
Well, Im a Linux noob so I was basically wondering if I can go into the command promt and input something to rev down the fan, make it run at a normal level? Are there any tools that come with knoppix that do that?
First of all, Hunkah, I heard of someone using WD-40 on a Swamp Cooler water pump (aka Evaporative Cooler) - the pump runs on 120 volt, and when they sprayed the pump motor with the lubricant, it burst into flames - it states right on the can - FLAMABLE - so, unless a fan motor is "cooled down" - don't attempt a flamable lubricant on one...
Second of all, RoamZero, are you running Knoppix from the CD, or have you installed it on the hard drive (i.e. you don't need to load the CD to boot Knoppix) ???
Are you sure the fan you are hearing is coming from the CPU? Or the Power Supply? Or it might be coming from the CDROM motor...
Those newer CDROM's can "spin-up" to some serious revolutions per minute, and what you might be hearing is the cdrom motor...
I think their is a setting (somewhere) on setting revs "max" on the cdrom speed, as for any of the "other" fans (your guess is as good as mine, I haven't heard of any settings)
Cuddles
I am running it from the CD. However, the CD drive motor only contributes a small amount of noise. I hear the fans "rev" up evertime I boot, regardless of whether there is a cd in the drive or not. I think this has to do with the fact that my PC is a small form factor one, and it probably does that because upon boot, alot of power is drawn into a small space, so the fans are somehow set to go faster because of that. The thing is that the fans die down immediatly when Windows starts running, but not with Knoppix, they just continue blowing really fast.
I am not an expert on this type of thing, but your system somewhat new?
I know there is a new fan system that goes faster when your system is hotter. I don't know if it is a BIOS setting or an OS setting, but the fact that it slows down in windows leads me to believe that it is an OS setting, or that your OS is over-ridding the BIOS settings.
Could be that Knoppix doesn't yet support that type of function.
Then again I could be wrong. I was waiting to see if anyone that has ever installed one would jump in with a comment first.
IIRC, the fan and the batteries on recent laptops are controlled via ACPI which isn't fully implemented on the 2.4 kernel. And since you are running knoppix from cd, there's no way of toying around with different kernels/patches.. So you might want to try disabling ACPI in the BIOS setup menu and enabling APM instead if possible.

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$95.20
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU
$229.95
Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99
Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08