Results 1 to 8 of 8

Thread: Noisy Fan help.

  1. #1
    Junior Member
    Join Date
    Feb 2004
    Posts
    3

    Noisy Fan help.

    I have a VAIO 1ghz desktop. Normally when it boots up, the fan revs up during boot, and once Windows starts loading, it calms down to a slower speed. When I try to boot Knoppix, the fan revs up and STAYS like that (really fast and really loud). I dont want to risk damaging the fan while using Knoppix (that, and it is annoying working with a super loud fan). Any help?

  2. #2
    Senior Member
    Join Date
    Oct 2003
    Location
    Canada
    Posts
    157
    For goodness sakes DON'T use WD-40! I heard of a person that stuck the nozzle in a hole and blasted the inside of his PC until it made a loud snap and started to smoke! The guy that fixed it said it was dripping when he opened the case!

  3. #3
    Senior Member
    Join Date
    Oct 2003
    Location
    Canada
    Posts
    157
    Actually he just opened the case and didn't bother fixing it.

  4. #4
    Junior Member
    Join Date
    Feb 2004
    Posts
    3
    Well, Im a Linux noob so I was basically wondering if I can go into the command promt and input something to rev down the fan, make it run at a normal level? Are there any tools that come with knoppix that do that?

  5. #5
    Senior Member registered user
    Join Date
    Dec 2003
    Location
    Salt Lake City, UT, U.S.A.
    Posts
    1,338
    First of all, Hunkah, I heard of someone using WD-40 on a Swamp Cooler water pump (aka Evaporative Cooler) - the pump runs on 120 volt, and when they sprayed the pump motor with the lubricant, it burst into flames - it states right on the can - FLAMABLE - so, unless a fan motor is "cooled down" - don't attempt a flamable lubricant on one...

    Second of all, RoamZero, are you running Knoppix from the CD, or have you installed it on the hard drive (i.e. you don't need to load the CD to boot Knoppix) ???

    Are you sure the fan you are hearing is coming from the CPU? Or the Power Supply? Or it might be coming from the CDROM motor...

    Those newer CDROM's can "spin-up" to some serious revolutions per minute, and what you might be hearing is the cdrom motor...

    I think their is a setting (somewhere) on setting revs "max" on the cdrom speed, as for any of the "other" fans (your guess is as good as mine, I haven't heard of any settings)

    Cuddles

  6. #6
    Junior Member
    Join Date
    Feb 2004
    Posts
    3
    I am running it from the CD. However, the CD drive motor only contributes a small amount of noise. I hear the fans "rev" up evertime I boot, regardless of whether there is a cd in the drive or not. I think this has to do with the fact that my PC is a small form factor one, and it probably does that because upon boot, alot of power is drawn into a small space, so the fans are somehow set to go faster because of that. The thing is that the fans die down immediatly when Windows starts running, but not with Knoppix, they just continue blowing really fast.

  7. #7
    Senior Member
    Join Date
    Oct 2003
    Location
    Canada
    Posts
    157
    I am not an expert on this type of thing, but your system somewhat new?

    I know there is a new fan system that goes faster when your system is hotter. I don't know if it is a BIOS setting or an OS setting, but the fact that it slows down in windows leads me to believe that it is an OS setting, or that your OS is over-ridding the BIOS settings.

    Could be that Knoppix doesn't yet support that type of function.

    Then again I could be wrong. I was waiting to see if anyone that has ever installed one would jump in with a comment first.

  8. #8
    Member registered user
    Join Date
    Jan 2004
    Location
    Osnabrück, Germany
    Posts
    95
    IIRC, the fan and the batteries on recent laptops are controlled via ACPI which isn't fully implemented on the 2.4 kernel. And since you are running knoppix from cd, there's no way of toying around with different kernels/patches.. So you might want to try disabling ACPI in the BIOS setup menu and enabling APM instead if possible.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack) picture

VMware vCenter Server 8 STANDARD Perpetual License Key VC-STD-C (Legacy Pack)

$1599.95



RDS CAL - Remote Desktop Services Windows Server 2022 50 User/Device Connections picture

RDS CAL - Remote Desktop Services Windows Server 2022 50 User/Device Connections

$68.00



Dell PowerEdge R240 Intel Xeon E-2144G 3.6GHz 16GB DDR4 ECC NO HDD 250W picture

Dell PowerEdge R240 Intel Xeon E-2144G 3.6GHz 16GB DDR4 ECC NO HDD 250W

$149.00



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$381.93



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$488.00



Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server picture

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server

$349.99



Microsoft Windows Server 2025 Standard 64bit 32 Core-50 CALs DVD With Key Sealed picture

Microsoft Windows Server 2025 Standard 64bit 32 Core-50 CALs DVD With Key Sealed

$95.99