bump
It seems to compile fine with a few warnings for create_* and extract_* (cc wants to see endian.h instead of byteorder.h).
when I do an insmod -p cloop, I get:
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol kunmap_high
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol filp_open
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol register_disk
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol blk_queue_bounce
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol register_blkdev
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol blk_queue_make_request
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol filp_close
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol do_generic_file_read
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol highmem_start_page
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol ntohl
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol blk_dev
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol fput
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol fget
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol kmap_high
/lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/cloop.o: unresolved symbol irq_stat
This is being compiled on Fedora Core 1
Any ideas?![]()
bump
I too had this problem - is there a proper doc for compiling this outside of gentoo or dbeian or whatever it was originally written for -
c'mon guys ... all your hard work should be free ... right?
(Actually I'm working on a bootable educational cd that is going to be apppliance ware - so I would like to get cloop working.)
The original errors I had was that it was looking for conf.vars in the linux source tree, somthing that seems to be non-standard. I touched the conf.vars file, but hen found some doc on the net that showed that it looks like conf.vars & .config are the same thing - not sure. Copied .config to conf.vars and the thing seemed to compile, oh and there was a problem with another file, but being an idiot I cannot remember the file name, but I touched it as well - so the thing finally compiles and when insmod'ing the thing I got the same errors.
Originally Posted by ghstridr
great
me too, i have an cloop: uresolved symbol ntohl error (not the rest)
i tried to pack my own kernel with knoppix, but after the boot, i get dropped in a shell, because knoppix wasn't able to load cloop.o i guess
if anyone finds a solution, please post
Hi all,
I've just been throught the problems discussed here (unknown
symbol: ntohl) and the fix seems to be adding -O2 to the compiler
flags in Makefile:line12 :-
CKERNOPS:= -O2 -D__KERNEL__ -DMODULE -fno-builtin -nostdlib -DKBUILD_MODNAME="cloop" -DKBUILD_BASENAME="cloop"
For those on non-Debian systems who lack conf.vars, run
"make menuconfig" in the kernel source tree and copy the
resultant .conf to conf.vars.
This prodices an error free cloop module on a 2.4.26 system
built from the LFS project with gcc-3.3.3.
Whether it actually works remains to be seen
ttfn
skywhale
very probably the reason is a mistmatch between cloop and insmod
not compiled with the same kernel_version
To be sure you should do this before compiling cloop
mv /usr/include/linux /usr/include/linux_old
ln -s /usr/src/linux/include/linux /usr/include/linux
and make sure that /usr/src/linux pointing to your kernel you are using ,for example
ln -s /usr/src/linux-2.6.5 /usr/src/linux
compile cloop then,and try insmod cloop.o
hth

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server
$349.99
Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$488.00
Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$169.99
Dell PowerEdge R740 E38S001 Server E38S
$660.00