Boots on laptop, but not desktop

[kmacandie]

Not sure what's wrong here. CD boots fine on my crappy old laptop with 700MHz PIII, but not on my shiny new AMD Athlon desktop. I get as far as Tux the Penguin appearing in the top left hand corner with a flashing cursor, and then nothing happens.

Any bright ideas?

Motherboard: ASUSTeK Computer INC. A7N8X2.0 REV 2.xx
Processor: 2600MHz AMD AthlonXP - 333MHz FSB
128 kilobyte primary memory cache
512 kilobyte secondary memory cache
Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD ASUS A7N8X2.0 Deluxe ACPI BIOS Rev 1007 10/06/2003

[Stephen]

Not sure what's wrong here. CD boots fine on my crappy old laptop with 700MHz PIII, but not on my shiny new AMD Athlon desktop. I get as far as Tux the Penguin appearing in the top left hand corner with a flashing cursor, and then nothing happens.

Any bright ideas?

Motherboard: ASUSTeK Computer INC. A7N8X2.0 REV 2.xx
Processor: 2600MHz AMD AthlonXP - 333MHz FSB
128 kilobyte primary memory cache
512 kilobyte secondary memory cache
Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD ASUS A7N8X2.0 Deluxe ACPI BIOS Rev 1007 10/06/2003

Try some of the "no" cheat codes like noacpi, noapic and maybe just failsafe by itself to boot with minimal hardware detection.

[rodenti]

I am having the same problem - the CD boots perfectly on other PCs but not the one I actually want to use.

I get the Penguin screeen and a blinking cursor, then after a few blinks the cursor disappears and nothing else happens. I have tried failsafe, noacpi, noapic, noapm, expert, and even tried disabling APM and ACPI in the bios and it still doesn't help.

My computer has a PCChips M741LMR motherboard with an ATI All-In-Wonder Pro graphics card (the onboard video is disabled). The OS installed is Windows 2000 pro and it runs very stable.

Any help will be appreciated.

Thanks.