what happens if you (at the line with BOOT ) put knoppix 2? that should give you a text only linux. to shut it down doCode:halt
I have a Knoppix bootable cd. I boot up my computer and te following occurs:
boot:_
loading vmlinuz...........
loading miniroot.gz
Then I get a BLACK screen and nothing happens I have to reset my computer to get it going again.
Can you help.![]()
what happens if you (at the line with BOOT ) put knoppix 2? that should give you a text only linux. to shut it down doCode:halt
You may also be seeing a problem I encountered. If you have a tape drive, Zip drive, or extra floppy, try placing the correct media in the drive and see if the problem goes away...![]()

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
Toshiba DT01ACA100 1 TB 3.5" SATA III 3.5 in Desktop Hard Drive
$24.99
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Seagate Barracuda ST1000DM003 1 TB SATA III 3.5 in Desktop Hard Drive
$23.99
Seagate ST3000NM0005 HDD 3TB SATA 6Gb/s 7.2K 3.5" 512 b/s
$59.00
Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$339.00
HGST Ultrastar HUS726040AL5210 4TB 7200RPM SAS 12Gb/s Enterprise HDD
$41.00
New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59