Quote Originally Posted by Exit
Thank you.

As for entering "192.168.0.0", can you be a little more specific, in regards to what location (after what prompt), than "the network setting"?

Respectfully,
Exit

The settings eventually end up in the file /etc/network/interfaces when the netcardconfig runs if it asks for a network setting then that would be the number you would have to use an example of the file below and now that I look at my file the network setting is optional so the netcard may not ask for it if that is the case then ignore my suggestion of the setting.

Code:
HappyTux:/home/stephen# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian installation
# (network, broadcast and gateway are optional)
auto eth0



iface eth0 inet static
        address 192.168.0.1
        netmask 255.255.255.0
        network 192.168.0.0
        broadcast 192.168.0.255
        gateway 192.168.0.254