-
Junior Member
registered user
Problems keeping settings across reboot
Hi,
I'm on the 2.6 Kernel running Knoppix 3.3 via debian installer using "knoppix-installer".
I love knoppix as it makes a great debian installer for those of us who don't know everything about linux
.
I just did my second apt-get update/upgrade since installing it about a month ago and after each upgrade i notice a lot of programs starting up, espicaly net services, that i dont want so i just apt-get remove <item> =) however, KMIX starts up each boot with a panel of sliders (volume control) and i just don't want to see that upon each bootup.
And of course, small things bother me. For example, each time i play something using KMIX the sound bar is at half. So i slide it to full. open/close it and then try to play something else. The bar is at full...
I restart and it's back to half. I was thinking that i need to create a persistant directory...however, if i do, must i run that config script each time i change someting? and what about sysconfig??
However, i would assume that because it's a HDD install that i wouldn't have to do that.
Thanks for any help.
-
Senior Member
registered user
Apt-get install those programs you removed in response to them being started. If you didn't want them to start upon your next boot up, open a shell console as root and type:
Code:
update-rc.d -f package remove
where package is the package being started. That will remove the symlinks in the rc#.d directories. If you need to put them back, you can use sysvinit (graphical utility) or open a shell console as root and type:
Code:
update-rc.d package defaults
and the symlinks will be created for starting programs at boot with the default number of 20.
As for kmix, to set the bars at a preset level, you need to set it in two places:
1) From kmix itself, set your bars to a level you desire, and then click on settings, then set volume levels as default.
2) From kcontrol, go to sound & multimedia >sound system >mixer tab > click the save volumes button and put a check on load volumes at login.
You're done and your sounds will start at the level you desired.
HTH,
Durand
-
Junior Member
registered user
hey,
thanks.
The services that i uninstalled are services that i won't ever use, aka apache, ssh, dns...however, that information is invaluable.
Thank you.
Similar Threads
-
By glidetothehoop in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 12-24-2004, 02:44 PM
-
By koselan in forum Networking
Replies: 7
Last Post: 08-19-2004, 05:01 PM
-
By ron2big in forum General Support
Replies: 1
Last Post: 08-01-2004, 07:24 PM
-
By sminotti in forum General Support
Replies: 1
Last Post: 06-25-2003, 09:25 PM
-
By beforewisdom in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 03-10-2003, 03:07 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99

Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00

Seagate Constellation ES.3 3.5 in Enterprise HDD | ST2000NM0033
$40.00

DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95

Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99

HGST HUS726060ALE610 0F23001 6TB HDD 3.5" SATA 6Gb/s 7.2K Hard Drive (V6315)
$61.56

Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99

HGST HUA723030ALA640 3TB SATA 7200 RPM 3.5 in Enterprise HDD | 0F14044 (100%)
$45.00

Seagate ST8000DM004 8TB 3.5" 6Gb/s 256MB SATA HDD P/N: 2CX188-300 Tested
$149.99

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$318.99