Results 1 to 4 of 4

Thread: Apt-get on standalone system

  1. #1
    Junior Member
    Join Date
    Mar 2004
    Posts
    5

    Apt-get on standalone system

    This is probably more of a Debian question than Knoppix, but here goes.

    Just installed Knoppix on an AMD64 a few days ago. Runs great.

    Am converting from RH-9 to Knoppix, mainly because of whacko problems with RH libraries and functions when I try to download and compiile even something simple. I am totally tired of RPMs that need dependencies that need dependencies that need.... and so on. Apt-get reads good, at least.

    I am on the wrong end of a 26k barbed wire and tin can phone line so apt-getting on the 'Net is totally impractical. However, I am told that you can download debs on another machine then install from CD. At the moment I am just trying to learn to install from the 7 cds that came with the Debian distro.

    All of the books and tutorials automatically assume that you have a good internet connection and say almost nothing about apt-getting with only CDs.

    I guess my main question is - how do you point apt-get to the cd roms? I have done an apt-cdrom add and it worked. The index is in /etc/apt/. But when I try to install even a very small program, it automatically tries to connect to the FTP servers and of course, fails. I can't find anything in the manuals, or the Kpackage manager that allow me to tell it to assume a CD source install. It must be there - I just don't see it.

    If I have overlooked a very simple man page or tutorial, go ahead and yell and I will gladly track it down. I have a feeling that I am seeing the trees but not the forest and I am making this too hard.

    Thanks all
    CptKrf

  2. #2
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    USA, IL
    Posts
    1,041

    Re: Apt-get on standalone system

    --Howdy, Cap. I feel yer pain. I went from DSL (165KB/sec) back to 56K dialup (3.0KB - 4.5KB/sec) and man, it is teh sux0r.

    --But bro, your best bet might be to start ' apt-get update ' late at night, say around 9pm, and check to see if it finished around 10 or 10:15pm. Then let ' apt-get upgrade ' run overnight, and check it about 6-8am. From there you can keep an eye on it, if it asks questions. Make sure you have an idle-seconds timeout setup on the modem, so it hangs up after idling for a while.

    --I'm just being realistic here. CD-based debian is by definition out-of-date, and there are regular security updates and bugfixes. You can get around much of the download pain by only doing upgrades once a week, and backing up the day before in case Something goes wrong. This is pretty much the way I've settled into doing things.

    --BTW - For dialup, life for me is at least a little easier due to keeping my Squid server. If you're interested in what this can do for speeding up your dialup connection, (and DSL as well) lemme know.

    http://www.squid-cache.org/

    Quote Originally Posted by CptKrf
    This is probably more of a Debian question than Knoppix, but here goes.

    Just installed Knoppix on an AMD64 a few days ago. Runs great.

    Am converting from RH-9 to Knoppix, mainly because of whacko problems with RH libraries and functions when I try to download and compiile even something simple. I am totally tired of RPMs that need dependencies that need dependencies that need.... and so on. Apt-get reads good, at least.

    I am on the wrong end of a 26k barbed wire and tin can phone line so apt-getting on the 'Net is totally impractical. However, I am told that you can download debs on another machine then install from CD. At the moment I am just trying to learn to install from the 7 cds that came with the Debian distro.

    All of the books and tutorials automatically assume that you have a good internet connection and say almost nothing about apt-getting with only CDs.

    I guess my main question is - how do you point apt-get to the cd roms? I have done an apt-cdrom add and it worked. The index is in /etc/apt/. But when I try to install even a very small program, it automatically tries to connect to the FTP servers and of course, fails. I can't find anything in the manuals, or the Kpackage manager that allow me to tell it to assume a CD source install. It must be there - I just don't see it.

    If I have overlooked a very simple man page or tutorial, go ahead and yell and I will gladly track it down. I have a feeling that I am seeing the trees but not the forest and I am making this too hard.

    Thanks all
    CptKrf

  3. #3
    Senior Member registered user
    Join Date
    Jul 2003
    Location
    UK
    Posts
    107
    In Europe, start around 5am before the Americans wake up!
    OG.

  4. #4
    Junior Member registered user
    Join Date
    Mar 2004
    Posts
    19
    I'm no expert on this since I just started using debian (knoppix hd install) last week.

    It might be due to the fact that your 7 debian cds are the "stable" release and some of the stuff on knoppix 3.3 is the "testing" release.

    Try commenting out all links to ftp site in your /etc/apt/apt.conf file and change your all instances of "testing" to "stable".

Similar Threads

  1. Replies: 0
    Last Post: 02-08-2005, 02:41 AM
  2. System Bug
    By donl in forum General Support
    Replies: 2
    Last Post: 03-29-2004, 07:15 PM
  3. pvm system
    By uerden in forum General Support
    Replies: 0
    Last Post: 01-26-2004, 12:50 PM
  4. The Zero Install system
    By mihai in forum Ideas
    Replies: 1
    Last Post: 05-05-2003, 07:07 AM
  5. No root file system (but system works)
    By freyley in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 01-31-2003, 09:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount picture

Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount

$489.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1... picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...

$324.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD

$149.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W

$524.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$248.00



Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD picture

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD

$99.99



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99