-
Senior Member
registered user
WINE problems/usage/issues - revisited
I scanned back a few pages, and I know someone had a "WINE" poll thread, but, decided to start a new one...
Having not used Wine very much, until recently, I have found one thing that "appears" to be an issue, and I can repeat it...
I have a Win98 install on device hdc1 - a partition of 2.0gig on a 80gig h/d (the other 78gig has been ear-marked for Linux Ext3 FS)
I have Wine pointing its files to this device, and the only reason I am recently using Wine, whereas before, I would have "never" thought to "commit" even 2gig to Windows, or a need to "ever" use Wine, but, Linux, as far as my apt-cache search has found nothing that works like this one program...
Having a business that digitizes analog sources into digital cd audio discs - I need to use some kind of "CD Label" program. What came with the labels was an Avery label program, and these labels have such a strange format on the sheet, I have found this program to be the "only" program that doesn't print every place other than on the label area...
I can start the Avery Label program from a click on the exe file, and Wine will get it started. The problem I have found is that if I change the label, and save it out. If I "close" the label, and try to reload it, Avery will crash stating the "label file" is corrupt and unreadable.
Here is the kicker, if I close down the Avery program, thereby, causing Wine to release control, and then re-open the Avery program, again, starting up Wine - I can then load the same "label file" fine.
From what I can tell is - Wine, or Avery, is unable to put out the label file to the disk, and that it is in memory - but Wine is not letting the Avery program access to this "memory" resident file. When you exit out of the program, and Wine - at that point - the memory resident "file" is flushed to the disk, and thereby, can be loaded fine [just my guess]
Has anyone had this same issue? (is it a common one?)
Thanks for any information,
Cuddles
-
Hi,
1. You know, the glabels program does great work with the Avery CD labels. That would probably be worth checking out for you. Just apt-get it.
2. Have you tried running the program as root? Sometimes that has gotten me over problems with wine.
3. If it's for business then crossover office might be worth picking up for you. It runs a ton of windows apps darn near perfectly and you could write it off as a business expense.
Of the 3, I would recommend glabels.
Similar Threads
-
By gamezealot in forum Networking
Replies: 6
Last Post: 02-07-2005, 04:05 PM
-
By TheTempest in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 03-27-2004, 10:32 PM
-
By mediaparty in forum General Support
Replies: 0
Last Post: 02-14-2004, 11:36 PM
-
By DanMc in forum General Support
Replies: 2
Last Post: 01-23-2004, 04:46 PM
-
By katsushiro in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 11-21-2003, 01:45 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU
$315.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99