Can anybody please tell me where the IP of DHCP Server is stored or are there any commands to get it ??
Can anybody please tell me where the IP of DHCP Server is stored or are there any commands to get it ??
What a strange question. You do understand that a client certainly does not need to know a DHCP server's address to use it, don't you? In pratice the DHCP server is always (as far as I know) on a device that has an IP address, but on reflecting on it I don't think it has to have an IP address. But if you're trying to talk to a DHCP server you can always talk to the broadcast address (255.255.255.255) with a DHCP request and you should get a response. You might want to look at RFC 1531 for more details (likely more than you want).Originally Posted by bhavin
Turning this into a Knoppix discussion, if you don't come across an easier way (and I certainly expect that there is an easier way), you could always run ethereal and watch the packets while you do a netcardconfig or other command that uses DHCP.

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
Seagate ST4000NM0034 Enterprise 4TB 7200RPM SAS 12Gb/s HDD v4
$39.00
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
HGST HUS726060ALE610 0F23001 6TB HDD 3.5" SATA 6Gb/s 7.2K Hard Drive (V6315)
$69.95
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$318.99
(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE
$199.99