-
proper complete harddisk install
hi there
i got a compaq evo200 subnotebook without any external drives, so i tried to install knoppix using another (a dell) laptop and knx-hdinstall. but that didn't work very well because it saved the dell-system-configuration to the harddisk and then consequently didn't boot properly (network card didnt work, most of all) as i placed it back into my evo200.
so, anyone got a good idea what to do?
i was wondering if i couldn't copy the whole cd to the disk and run it like a cd right there - that would make sure all the hardware is autoconfigured properly. - but i couldn't find any how to's, they all use some kind of extra boot disk or something..
why can't i just copy the complete cd data as it is to a blank partition on my hard disk and install it to another one? does the knoppix-cd-content have to be ran from cd?
-
Senior Member
registered user
You can install to the hard drive as a knoppix-style install.
When you choose 1.Configure Installation, one of the last questions is a choice between knoppix or debian style install. Choosing Knoppix should make it act as a live knoppix cd with the autoconfiguation on each boot. I have not tried swaping it to a different computer. Another option would be a network install.
johnb
-
Junior Member
registered user
Re: proper complete harddisk install

Originally Posted by
fabfab
why can't i just copy the complete cd data as it is to a blank partition on my hard disk and install it to another one? does the knoppix-cd-content have to be ran from cd?
you can!
create 3 partitions;
f.ex.
hda1 - 2 mb (boot; make sure this is active)
hda2 - 800 mb (knoppix cd)
hda3 - 512 mb (swap)
hda4 - the rest (persistant home)
use "cat /cdrom/KNOPPIX/boot.img > /mnt/hda1" and make it bootable
format hda2 as FAT32 "mkdosfs /dev/hda2 -F 32" and copy the CD to it "cp -r -v -v /cdrom/* /mnt/hda2"
make hda3 swap "mkswap /dev/hda3; swapon /dev/hda3". Then Format hda4 as ext3 "mkfs.ext3 /dev/hda4" and reboot. If you can't boot right away insert a DOS/Windows floppy and use "fdisk /mbr"
Hope this helps.
-
okai, that'll do.. thanks!
Similar Threads
-
By Merdock in forum Customising & Remastering
Replies: 0
Last Post: 12-27-2004, 04:33 AM
-
By ANDREW03 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 09-25-2004, 06:10 PM
-
By rrfish72 in forum General Support
Replies: 2
Last Post: 09-18-2004, 07:31 PM
-
By Panada in forum General Support
Replies: 9
Last Post: 04-12-2004, 02:08 PM
-
By david90schr in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 01-26-2004, 04:24 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Netac 2TB 1TB 512GB 256GB Internal SSD 2.5inch SATAIII Solid State Drive lot
$549.00

Samsung 2.5" 870 EVO SSD SATA III 250GB 500GB 1TB Internet Solid State Drive Lot
$100.00

Micron MTFDDAK256TBN 256 GB, Internal ,2.5" SSD
$23.00

Samsung 860 EVO 250GB SSD MZ-76E250 2.5" SATA III Solid State Drive -
$39.99

Crucial MX500 1TB 2.5" SATA III Internal SSD CT1000MX500SSD1
$99.99

Crucial MX500 250GB 2.5" SATA III SSD - Preowned
$29.00

2 PACK 128 GB SSD M.2 2280 SATA Solid State Drive Major Brands, Samsung, LiteON
$28.00

Fanxiang 256GB 512GB 1TB 2TB 4TB SSD Lot 2.5'' SATA Internal Solid State Drive
$42.99

Samsung 860 EVO 250GB, SATA III, 2.5" Internal Solid State Drive - Black...
$30.00

Netac 256GB SSD 2.5'' SATA III 6Gb/s Internal Solid State Drive 500MB/s PC/Latop
$40.00