Can anybody please tell me where the IP of DHCP Server is stored or are there any commands to get it ??
Can anybody please tell me where the IP of DHCP Server is stored or are there any commands to get it ??
What a strange question. You do understand that a client certainly does not need to know a DHCP server's address to use it, don't you? In pratice the DHCP server is always (as far as I know) on a device that has an IP address, but on reflecting on it I don't think it has to have an IP address. But if you're trying to talk to a DHCP server you can always talk to the broadcast address (255.255.255.255) with a DHCP request and you should get a response. You might want to look at RFC 1531 for more details (likely more than you want).Originally Posted by bhavin
Turning this into a Knoppix discussion, if you don't come across an easier way (and I certainly expect that there is an easier way), you could always run ethereal and watch the packets while you do a netcardconfig or other command that uses DHCP.

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge R640 10SFF 2x Gold 6140 2.3GHz 36-Cores 64gb H730p 2x Trays
$599.99
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99