Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: problem booting past first screen

  1. #11
    Junior Member registered user
    Join Date
    Apr 2004
    Posts
    12

    Re: Errors at the black screen!!!!!

    Quote Originally Posted by moonwalker
    Hi guys,
    i am new to all this stuff in fact its the first time to use linux OS. i made a knoppix live cd and it was successfull...buuut.....when i started to boot with cd it seemed to go well but after displaying the knoppix logo when it starts to load a lot of things in the black screen it gives me a hell of errors eroors errors it didn't succeed in making anything......what am i to do????
    a little help is appreciated.......thnx a lot.
    This is my exact same problem. Gives me tons of errors, and locks up at the Network Interface Part. Any help would be great.

  2. #12
    Junior Member
    Join Date
    Apr 2004
    Posts
    1
    Every time I boot Knoppix after the first boot screen my montor goes blank says "out of range." Its ok, let it sit for ten min. and you will see a Knoppix startup screen. It will work fine

  3. #13
    Junior Member
    Join Date
    Apr 2004
    Posts
    1

    Install stops after knoppix log screen

    I am also new in the linux world. Just installed knoppix 3.3 on an old DELLl notebook APM bios 1.2/ mem 618652 kb and ram 45856 K , 20 MB. PENTIUM ii ; 363 mHZ AND 256 kB. [[thats what it gave back at installation]. I got the warning that is was too small for KDE and i had to use TWM windows mgr. However, knoppix logo screen was what i got as well as a message [that i need at least 82 kb to start kde] Another box appeared [shell] showing knoppix@ttyp0[knoppix]$. When i put the cursor on the logo screen AND kept pressing the left mouseclick, i can see a menu, but there is no way to get any further... What to do...?


    Quote Originally Posted by kornface13
    Quote Originally Posted by moonwalker
    Hi guys,
    i am new to all this stuff in fact its the first time to use linux OS. i made a knoppix live cd and it was successfull...buuut.....when i started to boot with cd it seemed to go well but after displaying the knoppix logo when it starts to load a lot of things in the black screen it gives me a hell of errors eroors errors it didn't succeed in making anything......what am i to do????
    a little help is appreciated.......thnx a lot.
    This is my exact same problem. Gives me tons of errors, and locks up at the Network Interface Part. Any help would be great.

  4. #14
    Junior Member
    Join Date
    Apr 2004
    Location
    manchester u.k.
    Posts
    6
    well the reply i got earlier worked fine so many thanks but word of warning, don't try the mail program unless you intend to move over permanently. you'll lose any mail you recive. one of which might be really important!!! i will change over soon. its excellent when you get in so keep trying guys. just need to save my files before i do and think i will do a full format first. anyone know how to save outlook emails and address book in a useable format on linux?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Black screen when booting CD
    By gradnite in forum General Support
    Replies: 5
    Last Post: 07-05-2004, 07:30 PM
  2. Booting - black screen
    By Cykke in forum General Support
    Replies: 2
    Last Post: 05-23-2004, 07:29 PM
  3. When booting blank screen
    By JoeNEEDSHELP in forum General Support
    Replies: 1
    Last Post: 04-19-2004, 03:42 AM
  4. Knoppix Newbie Booting problem- Blank screen
    By Guardian in forum General Support
    Replies: 10
    Last Post: 04-06-2004, 09:18 AM
  5. Problems getting past boot screen.
    By flexyjerkov in forum General Support
    Replies: 2
    Last Post: 09-17-2003, 07:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethern picture

TP-Link TL-SG105, 5 Port Gigabit Unmanaged Ethernet Switch, Network Hub, Ethern

$15.25



NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch picture

NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch

$44.99



5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play picture

5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play

$31.99



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99



5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S... picture

5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S...

$9.64



10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W picture

10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W

$39.99



TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch picture

TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch

$19.99



5 Port Gigabit Unmanaged Ethernet Switch, AUMOX PRO Home 5|5*1G Port, Black picture

5 Port Gigabit Unmanaged Ethernet Switch, AUMOX PRO Home 5|5*1G Port, Black

$8.95



Extreme Networks 10GE X440-G2-24P-10GE4 16533 24Plus-Ports POE+ Switch UP picture

Extreme Networks 10GE X440-G2-24P-10GE4 16533 24Plus-Ports POE+ Switch UP

$127.00



Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch picture

Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch

$46.99