Results 1 to 7 of 7

Thread: CDR -v- CDRW

  1. #1
    Junior Member
    Join Date
    Apr 2004
    Posts
    5

    CDR -v- CDRW

    Hello
    I'm a newcomer... it probably shows...
    I've read quite a lot of stuff on the site about burning the iso file.
    My burner refuses to put it on to a CDR telling me it has to be a CDRW.
    OK - I'll go out tomorrow and buy one, but can anyone tell me why an ordinary 700 MB CDR won't work?
    Is the problem specific to Nero?

    I got the iso file at the third attempt using a simple copy command from the UK mirror. Twice a real download stopped after 98% and I got error messages from all the mirros saying "target file not specified" - without giving me the time to specify one.

    I imagine my problems won't stop there... it's good to see I'm not alone!

    All the best
    Keith

  2. #2
    Member registered user
    Join Date
    Nov 2003
    Posts
    66
    What version of nero are you using, 6.x had no problems for me, but in 5.x you need to enable overburn in the settings menu. As far as writting it to a CDRW, don't unless you have to, I attempted to do the same to save on media, but all of the disks became unrewritable after the burn due to overburning.

    You also might want to check the md5 sums for your disks, in windows you need to obtain md5summer (freeware) and the md5 sum from wherever you downloaded it from (in BT it comes with it but is not needed 99/100 times (early version of one client I was using had a flaw in the code) since it verifies using md5sums...

    hope this helps.

  3. #3
    Junior Member
    Join Date
    Apr 2004
    Posts
    5

    R -v- RW

    Thanks for getting back to me.
    I have Nero 5.5 and I enabled over burning as you suggested. It still rejects the CDR and requires a CDRW.

    I'm afraid I wouldn't know how to check the MD5 sum... can you explain that one for me please.

    If I use a rewritable it wouldn't be for rewriting anyway - so if that pleases his lordship Nero - I'll go along with him!

    Thanks once again - I look forward to dinding out more about Md5 sums
    All the best
    Keith

  4. #4
    Junior Member
    Join Date
    Apr 2004
    Posts
    5

    Sorry about that...

    ... for dinding read finding...

  5. #5
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    Portland, OR USA
    Posts
    568
    As mentioned in another thread, you may need to download a patch from Nero to fix an overburning bug in Nero v5.5.

    Actually, if you search this forum for "Nero" and "patch", you'll see a bunch of posts about the issue.

  6. #6
    Junior Member
    Join Date
    Apr 2004
    Posts
    5

    Nero patch

    Thanks.
    I did look at some of those postings but I didn't pick up the importance of the over burn patch.
    I'm downloading it at the moment
    I'll keep you posted
    Keith

  7. #7
    Junior Member
    Join Date
    Apr 2004
    Posts
    5

    CDR -v- CDRW

    A search like you suggested put up loads of interesting stuff. I think that with all that I should get somewhere.
    Sorry to have bothered you.

    I did try to install the patch for my version of Nero but it gave me an error message "only for Nero 5.5.10.50" - mine is 5.5.10.54 !!

    I'm going to try Burnatonce which I just downloaded.

    all the best
    keith

Similar Threads

  1. problem with cdrw
    By ibrewale in forum Hardware & Booting
    Replies: 3
    Last Post: 12-10-2004, 04:44 AM
  2. Does it fit on CDRW?
    By markusha in forum General Support
    Replies: 8
    Last Post: 04-01-2004, 01:27 PM
  3. backpack cdrw
    By scocrys in forum Hardware & Booting
    Replies: 5
    Last Post: 11-22-2003, 09:25 PM
  4. Fstab for CDRW?
    By wfb in forum Hardware & Booting
    Replies: 1
    Last Post: 09-04-2003, 09:36 PM
  5. Where is my CDRW?
    By Viro in forum Hardware & Booting
    Replies: 6
    Last Post: 04-26-2003, 07:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$378.93



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD

$149.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$488.00



Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700 picture

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700

$289.99



Dell Poweredge R620 10x 2.5

Dell Poweredge R620 10x 2.5" bay with 256GB (16x16gb) DDR3, 2x E5-2690v2, H710

$349.99



Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server picture

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server

$349.99