Results 1 to 4 of 4

Thread: Newbie - Need Help Getting Modem To Work

Hybrid View

  1. #1
    Junior Member
    Join Date
    Apr 2004
    Posts
    8

    Newbie - Need Help Getting Modem To Work

    Hi,

    Let me start by saying I am a newbie, but I'm learning and I'm very determined. I've been doing my homework but have reached a snag and need some help.

    I'm using the Knoppix 3.3 Live CD but I am unable to connect to the internet. I was able to configure the modem using the instructions found at This Site. Using /dev/ttyS0 I get a "Modem ready" message when I query the modem, but when I try to connect I get Initializing modem..... and it never gets any further than that. Thinking I may need to do something to get my modem to work, I did some searching.

    I've searched since yesterday and learned how to determine what type of modem I have using the FCC Registration Number. I then found the Linux/Modem Compatibility Knowledge Base and my modem is listed with an LM meaning I have a Winmodem that may work with a vendor-supplied Linux ("Linmodem") driver and there is a Penguin face next to it which I read means I have a Winmodem chipset with "Linmodem" drivers. (My modem is a SMART Modular Technologies, Inc. Model 90109-2 with FCC Registration Number: 2D7USA-35107-M5-E)

    Now I'm lost. Where do I get these drivers and once I aquire them, how do I get them to work using a live CD? Do I even need new drivers? I am so lost.

    If I sound like an idiot, there is no need to point it out. I feel like one too.

    Any help you could give would be greatly appreciated.

    Thanks in advance.

  2. #2
    Junior Member
    Join Date
    Apr 2004
    Posts
    8
    Well, I am the idiot that I think that I am.

    When I click on the "little Penguin face" I am taken to This Volunteer "Linmodem" Project Page and that in turn takes me to the LTModem Drivers for Linux page.

    Now for my next stupid question:

    I don't see "Knoppix" listed, do I use the Debian GNU/Linux binary package instead? Also, how do I "install" this since I'm running a live CD? Can I run this off of a floppy or what? Aaaaaaaand.....Which Of These do I download?

    I refuse to give up

  3. #3
    Junior Member
    Join Date
    Apr 2004
    Posts
    8
    Quote Originally Posted by Filbert
    I don't see "Knoppix" listed, do I use the Debian GNU/Linux binary package instead? Also, how do I "install" this since I'm running a live CD? Can I run this off of a floppy or what? Aaaaaaaand.....Which Of These do I download?
    Does no one have an answer for me?

    I still refuse to give up

  4. #4
    Junior Member registered user
    Join Date
    May 2004
    Posts
    16
    OK. Firstly, when you download something for your Knoppix, you will want the Debian version, as Knoppix is a Debian distro.

    Secondly, you won't be able to install your modem on a Live CD operation, but then, you will already have an Internet-capable OS installed already.


    My suggestion is use your Windows to connect to the 'net, but if you want to HDInstall Knoppix to your PC, call back here.

    Hope I've been of help!

Similar Threads

  1. Replies: 7
    Last Post: 03-24-2005, 07:37 PM
  2. Newbie needs help getting USB mouse to work
    By JrBobDobbs in forum General Support
    Replies: 0
    Last Post: 05-02-2004, 09:35 PM
  3. NEWBIE: Help getting modem work
    By ica in forum Networking
    Replies: 6
    Last Post: 02-19-2004, 04:19 PM
  4. Newbie - Cable modem install
    By slicksps in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 11-09-2003, 02:49 AM
  5. Newbie Modem problems...
    By Rorypyro in forum Hardware & Booting
    Replies: 1
    Last Post: 07-16-2003, 10:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡ picture

🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡

$109.99



Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P picture

Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P

$149.99



Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch picture

Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch

$245.00



Juniper Networks Mist Wireless Access Points, Model AP45 picture

Juniper Networks Mist Wireless Access Points, Model AP45

$59.99



Juniper MX204 +JUNOS and Dual Power Supply picture

Juniper MX204 +JUNOS and Dual Power Supply

$7299.99



Juniper MPC-3D-16XGE-SFPP 16-Port 10GbE SFP+ Line Card for MX240/480/960 picture

Juniper MPC-3D-16XGE-SFPP 16-Port 10GbE SFP+ Line Card for MX240/480/960

$149.99



Juniper Networks AP33-US Indoor Wifi6 (US Version) 5GHz: 4x4:4; 2.99 picture

Juniper Networks AP33-US Indoor Wifi6 (US Version) 5GHz: 4x4:4; 2.99

$24.99



Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic picture

Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic

$79.86



Juniper Networks EX3400-24T 24-Port Ethernet Switch w/Power Cord picture

Juniper Networks EX3400-24T 24-Port Ethernet Switch w/Power Cord

$174.99



Juniper Networks AP33 Wireless Access Point Bluetooth WiFi 6 Cloud Managed NIB picture

Juniper Networks AP33 Wireless Access Point Bluetooth WiFi 6 Cloud Managed NIB

$54.99