Printable View
The syslinux.cfg you've posted is ok; I can boot with it my Knoppix test installation without any error message. Perhaps you did a mistake with the name of the file?
Quote:
- go to boot->syslinux->sislinux.cfg (open with leaf or vi editor) and put in APPEND line
oh boy :)
you are joking, isn't it? or, mabe no...
Thanx, an(y/i)way. (this is bytes (not i) and time wasting), so long.
Hi,Quote:
Originally Posted by Blacksimon
I spent the weekend to no avail but now have an 8GB and 16GB Sandisk and today a 64GB Lexar USB drives with Knoppix 7.05 DVD - None of 3 will boot! Am I missing a step(s), somewhere?
10) wait the end of the process (formatting, install boot loader, copy data file)
I started with the 7.05 DVD .... when I had the Graphical Interface; I selected from (lower left) menu, Knowppix, Install to USB -Experimental. I let the Install Program do everything - Very smooth. When Finished, I reboot and receive the No DEFAULT or UI configuration directive found!
10) wait the end of the process (formatting, install boot loader, copy data file)
So, is your Step number 10... consisting of multiple steps; like installing lilo - Please, it's been some time. I'm back because of the possibility to carry mutiple boots and DVD of data on a USB. Thanks.
Did you test your DVD with Knoppix Cheatcode "knoppix testcd"?What message did you get at this point? Be aware, the progress-bar remains about half an hour nearby 99%. Wait patiently for the final message.Quote:
I let the Install Program do everything - Very smooth. When Finished, ..
Step 10 does not describe tasks You (as the user of the experimental Installer) have to perform, it just lists the many sub-tasks the Installer has to perform (while You have to wait).Quote:
Originally Posted by ttopp
The message You described might come from the Knoppix boot loader, but I am not sure. Is the same
message displayed when you start Your PC without any (USB-) Flash storage device attached?
Can Your PC boot from other flash memory storage devices? Can other PCs/Laptops boot Knoppix from Your USB flash memory devices?
I think that it is entirely possible that every one of Your installations was successful, but that your computer can not (currently) boot from USB: Most PCs built-in firmware/BIOS software requires a special key to be pressed before booting of any operating system (from hard disk or SSD) can take place. This key causes a boot device menu to be displayed. In this kind of menu you may then select the avaliable boot devices (among device vendor strings). I can not tell you which special key is needed for Your PC, but this is usually displayed during BIOS storage device detection in a message like "Press F11 to enter boot device selection menu." or "Press F8 key to choose system startup media". This display may zip by rather fast; But the Pause key is your friend.
Sometimes the PC firmware/BIOS requires reconfiguration before even allowing boot from USB media.
In Your BIOS setup, please check the boot device order (and other USB-related options).
Perhaps Your PC-BIOS gets confused by the second partition(s) ("/dev/sd?2") created by the experimental installer - Try to use the normal/older flash install program from the Knoppix DVD with Your 8 GB Sandisk stick (If that can be booted then You have a picky/broken BIOS. Your PC manufacturer might offer BIOS updates by download). Only storage devices with memory capacity bigger than 8 GiB can really benefit from the new experimental installer anyway.
I hope any of this can help You.
Ok... First - Thank you for the quick responses. On Knoppix DVD 7.05 from USB... experimental... I ran 'knoppix testdvd' and it Failed. Thank you.Quote:
Originally Posted by Werner P. Schulz
Ok... First - Thank you for the quick responses. On Knoppix DVD 7.05 from USB... experimental... I ran 'knoppix testdvd' and it Failed. Thank you.Quote:
Originally Posted by STraute
------------------------------------------------
You folks are good with your answers to posts. Your manners are patient and appreciated.
I have downloaded and installed Firmware Update for the Plextor 716A CD/DVD R RW DL. Finished. I have Updated 4.22.2005 AMI BIOS. Finished. I have adjusted BIOS to boot from DVD, USB, etc. I have pressed F8 to get a Boot Menu. Thank you.
-------------------------------------------------
These Thank yous are sincere. It helps my memory to read and re read the forum posts after so long. I am looking for the 7.1 DVD and will start over. -Installing to Flash-USB Experimental. Until then...
I have a 8GB w optional overlay, a 16GB w p, and a 64GB install w 1505MB Reiser FS partition?. Thanks. ..looking for computers here at the home to test them on, although, with the DVD Failing (the 7.04-5? *CD, PASSED!) -maybe yes/ maybe no. One more on the errors... in the beginning when I first started.. I received 'Can't find Kernel' errors. I haven't seen that in a while. I thought Sandisk specific?
-----------------------------------------------------
I used to be fairly adept at this and I'm enjoying the heck out of it again... so thanks and I'm keeepin on.
So Mr. Schulz came up with the useful recommendation (while I only came up with unhelpful guesses). You need a boot medium that works. There are several possible approaches now, depending on Your preferences:Quote:
Originally Posted by ttopp
- Perhaps a USB flash storage device created from the Knoppix CD is sufficent for Your current needs.
- If You still have a ISO file with the Knoppix DVD image, then You can try to write that to another DVD+-R(W).
- Or You can skip the DVD burning by using that Knoppix DVD image ISO file to create an intermediate bootable flash storage device instead. I would use the unetbootin tool (http://unetbootin.sourceforge.net/) to write such a bootable medium. You can use the testcd cheat code with such an USB medium too. After that checks out You could boot that USB stick again and try the experimental installer from there to install on a seperate USB flash storeage device (to get a file system which is not just writeable but with changes persisting across reboots).
And Thank You for Your diligence in following advice and reporting Your results here (Even for my unhelpful guesses on probable causes).Quote:
Originally Posted by ttopp
-------------------------------------------------
It will be a couple of months before the Knoppix 7.1 images become public. Until then You only can get 7.1 by buying a copy of german Linux Magazin.Quote:
Originally Posted by ttopp
After the "testcd" failed it is much more likely that this is a/the cause of the failed boots/kernel loads You have experienced. I think it is not probable that Sandisk is at fault here. You need a working and tested boot medium first.
[QUOTE=STraute;129184]So Mr. Schulz came up with the useful recommendation (while I only came up with unhelpful guesses).
Whoah... Hold on there , STraute. You give excellent information. In fact it was your information that kept me busy and brings back a 'disciplined' approach -with a new conscientiousness. Hmm, did I spell that right? I was confused how to divide up my responses and afterwards, I thought the Administrator might be upset with the way I used this 'Reply area'. Everything is new. I have done four full days since Sat last and 9:30 Central time last nite, I received my first 'All files OK' on my Knoppix DVD 7.05. So, before I slept I created a 16GB SanDisk w 12GB Partition. It didn't boot. UI error. This AM I created the little 8GB SanDisk w 3900MB Overlay and then saw your email.
And Thank You for Your diligence in following advice and reporting Your results here (Even for my unhelpful guesses on probable causes). Now Stop that! (Jack Benny).
-------------------------------------------------
This is what these forums are for. (Example) I have a Ultra ATA/133 Sil680 Raid controller card. I bought it so I could have larger disks ( 2 300 GB Drives). OK. Now, the drive that boots my system is a 160GB and is plugged into the IDE-0 slot. But I can't point the system BIOS to the 160GB. I have to point it to the controller and tell BIOS to 'Search other Drives', to get the desired result. Go figure. And STraute, my friend, it was your suggestions both last time and today that has me paying attention to All these little 'quirks'. Thank you. This is a lot of fun. -I do get a little frustrated because I'm not further along.. I'd like to be booting into a Dragon Dictate type environment. But, -day at a time-. Stay well everyone. I'm keeepin on.
Wow. Great afternoon. All 3 worked and I am hacking new ones (multi-boot) to try. USB Still doesn't work on my pc. But I have seen them all work. Thanks for the ubunetuin? That was SLICK. Gotta go- Friend's Birthday and I am late. B-4 I go,,, My PC does boot from a 256MB Lexar thumb w Steve Gibson SpinWrite. Maybe it is 'FreeDOs' making it happen. Stay well, this is fun and I am Keeepin on.Quote:
Originally Posted by ttopp