Have you tried this:
modprobe ohci1394
Let us know how it goes eh?
Hi,
I have a Sony Vaio GRX600. I have attached to it via the iLink (1394)port a hard drive inside a drive enclosure. Knoppix recognizes the 4 internal NTFS partitions on the Sony, but does not seem to recognize the external drive which is FAT32.
What can I do to help Knoppix recognize the external drive?
Thx,
tomber
************************
LCPI.txt
¬ \@¬ \@compatible controller: ATI Technologies Inc Radeon Mobility M7 LW
(prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency
66, IRQ 9
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168, IRQ 3
Memory at e8202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001
02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168
Memory at e8203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00004c00-00004cff
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 64
Memory at e8201000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <available only to root>
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet
Controller (rev 42)
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 66, IRQ 9
Memory at e8200000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 4000 [size=64]
Capabilities: <available only to root>
Have you tried this:
modprobe ohci1394
Let us know how it goes eh?
It's not working so I am going to get a new copy of Knoppix--one without the cloop errors. I bought this thing of ebay because the isos I download never match in md5 and won't boot. I am going to start over and repost later. Thx.
Vintage Comdyna Inc Analog Computer Model GP-6 | No Power Supply
$1499.99
NEC Multisync II JC-1402HMA VGA EGA CGA Analog TTL Computer Monitor Vintage 1988
$699.99
Vintage 1960s Donner Model 3000 Analog Computer ~ MUSEUM PIECE Extremely Rare
$4000.00
Tandy TRS 80 Computer 2 w/Disc Drive FD-501, Joystick & Original Boxes & Manuals
$250.00
Macintosh SE/30 M5119 Computer 20MB RAM 1.2GB Hard Drive Recapped Working *Read*
$475.00
NEW Aquarius+ Computer Signature Edition - 8Bit Retro System
$239.00
Landen Computer. Circa 1898. the Rapid Computer Company. With Original Case.
$425.00
NEW Aquarius+ Mini 8Bit Retro Computer System - Assembled PCB ONLY
$109.00
Extron RGB-160XI Analog Computer Video 60-378-01
$187.06
Macintosh Classic/Classic II Analog Board Computer 630-0395 New
$270.00