Woah, tried the "knoppix nodma" option at boot, it worked. Now if I install to HD, how can I make that change permanent?
I'm using a Dell Latitude D300 which works fine with Knoppix 3.3, under 3.6 when the boot screen comes up it says the following:
*****
Welcome to the KNOPPIX live Linux-on-CD!
Scanning for USB/Firewire devices... Done.
Enabling DMA accelseration for: hda [IBM-DADA-26480]
Enabling DMA accelseration for: hdc [TOSHIBA CD-ROM XM-1802B]
Looking for CD-ROM in: /dev/scd0 <flashing cursor>
*****
And that's where it hangs. I'm thinking about trying it without DMA acceleration, is there a command I can use at boot to disable DMA acceleration on hdc? Or could there be another problem? I'd like to install-to-HD, if this is the problem, how do I make the change permanent?
Woah, tried the "knoppix nodma" option at boot, it worked. Now if I install to HD, how can I make that change permanent?
depends on what type of install you choose.
in some variants the used cheatcodes just "tag along"
otherwise they could be added to grub or lilos configfiles.
Looks like that was the case, 3.6 installed itself with the "knoppix nodma" option by default... now to fix the sound. Thanks!Originally Posted by OErjan
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99