Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Extra details: I have a fone which has a inbuilt modem (modem type=std 33600bps modem)
No linux drivers given by those guys, and they say only windows is supported. But I know Knoppix
is capable of connecting with the same fone.
I have config'ed tata fone (walky) for internet, and while dialing
I get this message in the log file for debug window.
Tell me where I have gone wrong.Code:======================================== O NO CARRIER K ATM1L1 OK ATX3 OK ATDT*777# ========================================
I get to see NO CARRIER at the dialing utility before this stage it was initializing modem
The above was config'ed in kppp. I did not try wvdial yet.
Iam waiting for more suggestions before trying it.
Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Phone with modem? And how is it connect to the PC? With serial cable?
Yeah , com1. Serial port.
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
DELL PERC H310 RAID Controller with Cables, OHV52W, 6Gb/s SAS SATA PCIe x8
$19.95
Inspur LSI SAS3008 12Gbps SAS HBA RAID Controller Card P/N:YZCA-00424-101 Tested
$24.99
Dell PERC V10 Z0017A SAS-SATA RAID Controller Card No Bracket N4C2D 5R10N
$52.97
Dell KMCCD PERC H730 MINI MONO 1GB RAID CONTROLLER W/Battery
$26.99