I am running Knoppix with no hard drive, just a USB flash drive mounted as sda1. The drive is only 1/4 full. I can see from using Konqueror to browse files and also from the command line that all files have rwxrwxrwx permissions. I am trying to write to the USB drive but can't. If I use KEdit I get the message:
"The document could not be saved, as it was not possible to write to file:///mnt/sda1/asd.
Check that you have write access to this file or that enough disk space is available."
If I try to export bookmarks from Firefox I get not error message but the file is never written to the disk. I believe the problem started when I removed the USB drive and then replaced it during normal operations. After plugging the drive back in, I remounted it, and now I can read files fine, just can't write. I tried to unmount sda1 and then mount it again, but when I enter the command "umount /mnt/sda1" I get this message: "umount: /mnt/sda1: device is busy". Perhaps this is a clue.
Any ideas on how I can save all the work I have in memory before rebooting? Thanks!
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00