-
iso datei in GNU-Grub eintagen als LiveSystem
Hallo,
habe nun schon das ganze netz durchsucht und auch hier geschaut aber finde leider nur andere arten der einrichtung.
ich würde gerne die iso datei in mein GRUB als system eintragen, klar es ist dann immer wieder alles weg was man da macht aber das ist auch ok so.
habe das schon mit einem anderem livesystem so gemacht und da geht es super aber mit knoppix bekomme ich das nicht so recht hin. weiß da einer einen rat?
hier mal meine menu.lst
Code:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.20-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro single
initrd /boot/initrd.img-2.6.20-16-generic
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro quiet splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=1f511134-3756-46f2-9621-6f6140dc72c7 ro single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
### ISO Sidux
title -Sidux-
kernel (hd0,0)/usr/sidux/vmlinuz boot=fll quiet vga=791 fromiso=/usr/sidux/sidux.iso
initrd (hd0,0)/usr/sidux/miniroot.gz
### ISO Knoppix
title -Knoppix-
kernel (hd0,0)/usr/knoppix/linux boot=fll quiet vga=791 fromiso=/usr/knoppix/knoppixkl.iso
initrd (hd0,0)/usr/knoppix/minirt.gz
Wie man drauß erkennen kann benutze ich Ubuntu als hauptsystem fals das wichtig ist.
freue mich über alles was mich zu meinem ziel führt. bitte keine anderen wege zeigen habe das ganze netz schon durchsucht und schon hunderte andere arten gesehen und würde das gerne so machen. Danke
MfG Moinsen
-
Habe es jetzt schon mal soweit gebracht das er startet, aber dann beim punkt wo er die festplatte sucht wo er die Iso drauf finden soll sagt er das er die nicht finden kann, ist aber alles richtig eingetragen. kann es sein das er die nicht selber monten kann?
MfG moinsen
Similar Threads
-
By grandad in forum Hardware & Booting
Replies: 6
Last Post: 02-27-2009, 09:03 PM
-
By DieterJ in forum German Forum
Replies: 0
Last Post: 11-20-2007, 11:36 AM
-
By romario in forum German Forum
Replies: 1
Last Post: 09-21-2005, 02:02 PM
-
By Neil Young & Crazy Ho in forum General Support
Replies: 1
Last Post: 05-14-2004, 07:05 AM
-
By dantay in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 03-16-2004, 02:06 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![HP Workstation Z640 2x Xeon E5-2623V3 32GB Ram 2x256GB SSD Quadro K420 NO OS GA picture](/store/img/g/rIQAAOSwN9Nlnw4a/s-l225/HP-Workstation-Z640-2x-Xeon-E5-2623V3-32GB-Ram-2x2.jpg)
HP Workstation Z640 2x Xeon E5-2623V3 32GB Ram 2x256GB SSD Quadro K420 NO OS GA
$154.98
![Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables picture](/store/img/g/p7UAAOSwdWxmeBAb/s-l225/Dell-T7810-Workstation-1x-E5-2603-v3-16GB-RAM-Nvid.jpg)
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
![E5-2699V4 Intel Xeon Processor 55M Cache, 2.20 GHz SR2JS CM8066002022506 picture](/store/img/g/HmIAAOSwls5frj~X/s-l225/E5-2699V4-Intel-Xeon-Processor-55M-Cache-2-20-GHz-.jpg)
E5-2699V4 Intel Xeon Processor 55M Cache, 2.20 GHz SR2JS CM8066002022506
$155.00
![HP Z440 Workstation 18Cores Xeon E5-2699 V3 128GB 1TB SSD 2TB WIFI WIN11 R5-340X picture](/store/img/g/itIAAOSwjT9mKCN6/s-l225/HP-Z440-Workstation-18Cores-Xeon-E5-2699-V3-128GB-.jpg)
HP Z440 Workstation 18Cores Xeon E5-2699 V3 128GB 1TB SSD 2TB WIFI WIN11 R5-340X
$309.99
![SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor picture](/store/img/g/fEMAAOSwy1JmPnWm/s-l225/SR1XP-Intel-Xeon-E5-2680-v3-12-Core-30MB-2-5GHz-LG.jpg)
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.38
![Intel Xeon E5-2683 v4 2.1GHz 16-Core 40MB LGA2011 Server CPU P/N: SR2JT Tested picture](/store/img/g/-N0AAOSwjT1lXPDz/s-l225/Intel-Xeon-E5-2683-v4-2-1GHz-16-Core-40MB-LGA2011-.jpg)
Intel Xeon E5-2683 v4 2.1GHz 16-Core 40MB LGA2011 Server CPU P/N: SR2JT Tested
$19.99
![Dell Precision Tower 5810 Xeon E5-1650 v3 3.5 GHz 32 RAM 256GB SSD Windows 11 picture](/store/img/g/drcAAOSwUxNmgwb6/s-l225/Dell-Precision-Tower-5810-Xeon-E5-1650-v3-3-5-GHz-.jpg)
Dell Precision Tower 5810 Xeon E5-1650 v3 3.5 GHz 32 RAM 256GB SSD Windows 11
$114.99
![Intel SR1XD Xeon E5-2699V3 2.30Ghz 18-Core Socket 2011 CPU Processor Haswell picture](/store/img/g/FLcAAOSwR89mfH1M/s-l225/Intel-SR1XD-Xeon-E5-2699V3-2-30Ghz-18-Core-Socket-.jpg)
Intel SR1XD Xeon E5-2699V3 2.30Ghz 18-Core Socket 2011 CPU Processor Haswell
$35.00
![Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD picture](/store/img/g/HDwAAOSwTHFl06dB/s-l225/Intel-Xeon-E5-2699-v3-2-3GHz-18-Core-45MB-145W-LGA.jpg)
Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD
$40.99
![Matching Pair Intel Xeon E5-2470V2 2.4GHz 25MB 8GT/s SR19S LGA 1356 Processor US picture](/store/img/g/Rq4AAOSwB-pgb7pt/s-l225/Matching-Pair-Intel-Xeon-E5-2470V2-2-4GHz-25MB-8GT.jpg)
Matching Pair Intel Xeon E5-2470V2 2.4GHz 25MB 8GT/s SR19S LGA 1356 Processor US
$52.24