First, run
Then, install the klik client (NOT as root):Code:sudo apt-get install binutils libstdc++5 rpm gnome-about
and follow instructions on screenCode:wget klik.atekon.de/client/install -O -|sh
This prepares your machine to run cmg files.
wich packet do I need to run a downloaded *.cmg file? I use Ubuntu
First, run
Then, install the klik client (NOT as root):Code:sudo apt-get install binutils libstdc++5 rpm gnome-about
and follow instructions on screenCode:wget klik.atekon.de/client/install -O -|sh
This prepares your machine to run cmg files.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.6Ghz 28-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$490.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99