-
Senior Member
registered user
Kind of minirt init changelog...
Here's the init changes (ADRIANE 6.7). Among other things, ext4 mounting is now in place.
Also, the kernels, both 32 and 64 bits, have grown a lot - probably heaps of extra modules included as deemed necessary.
Code:
";;
4c4
< # (C) 2011 by Klaus Knopper <knoppix@knopper.net>
---
> # (C) 2010 by Klaus Knopper <knoppix@knopper.net>
140,141d139
< local rc="1"
< # Try to be quick, and probe the "most likely" file systems first
146,161c144,146
< mount -t ext4 -o "$RW" "$1" "$2" || \
< mount -t ext3 -o "$RW" "$1" "$2" || \
< mount -t ext2 -o "$RW" "$1" "$2"
< rc="$?"
< # Still no luck? Try everything else that the (static) kernel supports
< if [ "$rc" != 0 ]; then
< local fs
< for fs in `awk '!/^nodev/{print $1}' /proc/filesystems 2>&1`; do
< case "$fs" in
< ext[234]|reiserfs|ntfs|fuse*|*fat|iso9660) ;; # Already did that
< *) mount -t "$fs" -o "$RW" "$1" "$2"; rc="$?";;
< esac
< [ "$rc" = "0" ] && break
< done
< fi
< return "$rc"
---
> mount -t ext3 -o "$RW" "$1" "$2" || \
> mount -t ext2 -o "$RW" "$1" "$2"
> return "$?"
303c288
< [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod" >/dev/null 2>&1
---
> [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod"
338c323
< *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[0;0H[J";;
---
> *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[6;0H[J";;
341,347d325
< message \
< ' _ __ __ __ _____ _____ _____ __ _ __ ___ _______
< / / / / / | / / / ___ \ / __ \ / __ \ / / | |/ / / ___/ \___ /
< / /__/ / / | / / / / / / / /__/ / / /__/ / / / \ / / /_ __/ /
< / / _ - / /| |/ / / / / / / _____/ / _____/ / / / | / __ \ /_ _\
< / / \ \ / / | / / /__/ / / / / / / / / /\ \ / /_/ / _ / /
< /_/ |_|/_/ |__/ \_____/ /_/ /_/ /_/ /_/ |_| \____/ /_/ /_/'
447,455c425
< #@@@GvR
< # Try using other (SMB) mounts
< [ -z "$MOUNTED" ] && [ -x /static/mount.cifs ] && { if [ -n "$NFSDIR" ]; then
< message -n "${CRE}${BLUE}Trying to SMB mount CD on ${MAGENTA}$NFSDIR${BLUE}...${NORMAL}"
< message /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount /mnt-system > /dev/null 2>&1
< fi; }
< #@@GvR
---
>
482c452
< checkbootparam "bootfrom" || debugshell
---
> debugshell
488,580d457
< # Return existing device names listed as regular expressions
< listpartitions(){
< local pattern file
< for pattern in "$@"; do
< for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
< file="${file##*/}"
< [ -b "/dev/$file" ] && echo "/dev/$file"
< done
< done
< # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
< }
<
< #@@@GvR Bootfrom Section start
< BOOTSYS="/mnt-system"
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< # find BOOTFROM variable (/dev/sda1/boot/k620/*.iso)
< BOOTFROM=""; bootfrom="";
< for i in $CMDLINE; do case "$i" in [Bb][Oo][Oo][Tt][Ff][Rr][Oo][Mm]=*) eval $i;; esac; done
< [ -n "$bootfrom" ] && BOOTFROM="$bootfrom"
< if [ -n "$BOOTFROM" ]; then
< # we may have an ISO file, try mounting it
< BOOTISO="/mnt-iso"; BOOTDEV=""; BOOTFILE=""
< mkdir -p $BOOTISO $BOOTSYS
< [ -b /dev/loop1 ] || mknod -m 755 /dev/loop1 b 7 1
< if [ -n "$NFSDIR" ]; then
< umount $BOOTSYS; MOUNTED=""
< message nfs remount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS
< mount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS > /dev/null 2>&1 && MOUNTED="yes"
< if [ -z "$MOUNTED" ]; then
< umount $BOOTISO >/dev/null 2>&1
< if [ -x /static/mount.cifs ]; then
< message cifs remount "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount $BOOTISO > /dev/null 2>&1
< fi
< fi
< BOOTFILE=$BOOTFROM
< else
< BOOTDEV=$(echo "$BOOTFROM" | awk -F/ '{print $1"/"$2"/"$3}')
< BOOTFILE="${BOOTFROM#*/}"; BOOTFILE="${BOOTFILE#*/}"; BOOTFILE="${BOOTFILE#*/}"
< message -n "${CRE}${BLUE}Trying to mount the ISO partition ${MAGENTA}$BOOTDEV${BLUE}...${NORMAL}"
< trymount "$BOOTDEV" "$BOOTISO" >/dev/null 2>&1
< fi
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1
< message "${CRE}${RED}Cannot mount the partition ${MAGENTA}$BOOTDEV${NORMAL} (cannot find: ${RED}${BOOTISO}/${BOOTFILE}${NORMAL})"
< ls -al "$BOOTISO"
< else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then umount $BOOTSYS >/dev/null 2>&1
< message -n "${CRE}${RED}Cannot mount CD image on ${MAGENTA}${BOOTFILE}${NORMAL}"
< umount "$BOOTSYS" >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< # try to find ISO in an alternate locations using the same path
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< message -n "${CRE}${MAGENTA}Trying to find the ISO image in an other partition...${NORMAL}"
< # If USB storage device, wait for USB...
< if [ -d /sys/bus/usb/drivers/usb-storage ]; then WUSB="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20"; else WUSB="1"; fi
< for i in $WUSB ; do
< for BOOTDEV in $(listpartitions 'hd[a-z]' 'hd[a-z][0-9]*' 'scd[0-9]*' 'sr[0-9]*' 'sd[a-z]' 'sd[a-z][0-9]*'); do
< if [ -b "$BOOTDEV" ]; then
< message -n -e "\r${CRE}${BLUE}Searching for ISO in: ${MAGENTA}${BOOTDEV}${NORMAL} "
< trymount "$BOOTDEV" "$BOOTISO" > /dev/null 2>&1
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1; else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< umount $BOOTSYS >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< fi
< done
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< break
< else
< message -n -e "\r${CRE}${BLUE}${WAITFORUSB}${NORMAL} $i ";
< sleep 1
< fi
< done
< fi
< fi
< fi
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then MOUNTED="yes"; FOUND_KNOPPIX="true"; fi
< #@@@GvR Bootfrom Section end
<
<
582c459
< amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null); #'
---
> amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null)
594,607c471,481
< #@@@GvR add "ramdisk" parameter to allow specifying ramdisk size, otherwise just use max(ram*4/5,2000)M
< for i in $CMDLINE; do case "$i" in [Rr][Aa][Mm][Dd][Ii][Ss][Kk]=*) eval $i;; esac; done
< case "$ramdisk" in
< [0-9]*[KMG]) RAMDISK="$ramdisk" ;;
< esac
< if [ -z "$RAMDISK" ]; then
< if [ "$TOTALMEM" -ge 2000 ] >/dev/null 2>&1; then
< RAMDISK="$(expr $TOTALMEM / 5)"; RAMDISK="$(expr $RAMDISK \* 4)M"
< else
< # Too large, but we can still use swapspace
< RAMDISK="2G"
< fi
< fi
< #@@@GvR
---
> # Return existing device names listed as regular expressions
> listpartitions(){
> local pattern file
> for pattern in "$@"; do
> for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
> file="${file##*/}"
> [ -b "/dev/$file" ] && echo "/dev/$file"
> done
> done
> # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
> }
609c483
< if [ -z "$FOUND_KNOPPIX" -a -z "$TSCLIENT" ]; then
---
> if [ -z "$TSCLIENT" ]; then
650c524
< mount -t tmpfs -o size="$RAMDISK",dev,suid,exec tmpfs /ramdisk
---
> mount -t tmpfs -o size=2G,dev,suid,exec tmpfs /ramdisk
671c545
< [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib:/KNOPPIX/lib/i386-linux-gnu" /KNOPPIX/"$cmd" "$@"
---
> [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib" /KNOPPIX/"$cmd" "$@"
739c613
< for base in $home /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
---
> for base in /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Amiga 4000TX computer motherboard
$2643.23
Amiga 1200 Computer * Recapped * TF1230/55 * 64GB* 160GB
$949.00
TF1232: a 25MHz 68030 Amiga 1200 accelerator with 64MB RAM and FPU option
$138.11
Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200
$37.32
Amiga OS Operating System v3.1 Install Disks for Commodore Amiga
$38.98
TF1260 including 68LC060 CPU, accelerator card for the Amiga 1200, 128MB Ram
$320.79
Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek
$65.00
TF536: an Amiga 500 accelerator with 68030/50, 64MB RAM, IDE interface+CF card
$211.18
TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network
$65.00
pi1541 Disk Emulator for Commodore -
$38.95