Hi all..
I am new on Linux.
I prepared an usb flash includes diffrent Knoppix Distros.
I used Grub4Dos for boot Knoppıx 7.05 DVD.iso
My USB flash is like this.
====================
grldr
menu.lst
...
etc
ISO <Folder>
Knoppix.iso
Slax.iso
...
Etc
==================
I succesfully booted Knoppix. But after I booted Knoppix, I see that My USB Flash drive is not shown completely. Only content of Knoppix.iso is accessible.
When I check from Gparted , I shows me : /dev/sdb1 mounted /mnt-iso
I need to access whole usb stick.
How can I manage this ?
Thank you in advance...
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99
Dell LSI 9440-8i MegaRAID 8 Port 12GB/s HBA High Profile RAID Controller YW3J6
$84.99