Hi all..
I am new on Linux.
I prepared an usb flash includes diffrent Knoppix Distros.
I used Grub4Dos for boot Knoppıx 7.05 DVD.iso
My USB flash is like this.
====================
grldr
menu.lst
...
etc
ISO <Folder>
Knoppix.iso
Slax.iso
...
Etc
==================
I succesfully booted Knoppix. But after I booted Knoppix, I see that My USB Flash drive is not shown completely. Only content of Knoppix.iso is accessible.
When I check from Gparted , I shows me : /dev/sdb1 mounted /mnt-iso
I need to access whole usb stick.
How can I manage this ?
Thank you in advance...
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99
OEM 9300-8I 12Gbps HBA IT Mode ZFS FreeNAS unRAID+2*SFF-8643 SATA Cable US
$59.88