Results 1 to 6 of 6

Thread: 7.2.0 usb persistent image question

  1. #1
    Member registered user
    Join Date
    Nov 2006
    Posts
    30

    7.2.0 usb persistent image question

    I recently bought 7.2.0 dvd on a usb drive from a retailer listed in the Order Knoppix section of the site. The problem is unlike previous versions I have had, the option to create a persistent image is not displayed during boot. I found that my session was automatically saved on the usb after I shut down, which I do not want. Usually I choose not to have persistence or encryption.

    Is this some kind of flaw or has something changed?

  2. #2
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Perhaps the retailer has already created a persistent memory for you. Have a look at
    http://knoppix.net/wiki/Category:Har...e_Installation
    to learn more about the two different methods of persitent memory within Knoppix. If you don't like it, delete the file knoppix-data.img respectively the file knoppix-data.inf (and the content of the overlay partition).

  3. #3
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    In the link it says:Flash disk InstallBoot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk' (since Knoppix 7.1, respectively "experimental version" in Knoppix 7.05). There are two options to choose from:Installation on FAT32 with (optional) overlay file < 4GBInstallation on FAT32 with additional overlay partitionIn the first case you will get an installation of compressed filesysten Image and the persistent memory all within '/dev/sda1' (FAT32 formatted).In the other case you will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the persistent memory in '/dev/sda2' (ReiserFS formatted).What do I do if I don't want either type of persistent memory? ie: no persistent memory? Choose Cancel?Thanks.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    If you cancel the installation of persistent memory within 7.2.0, the installation is broken and you cannot use it. With earlier versions of Knoppix you have had the ability to pass over this step and always use the cheatcode "knoppix noimage".

  5. #5
    Member registered user
    Join Date
    Nov 2006
    Posts
    30
    So it is necessary to always create some persistent memory?And I can not use the noimage cheatcode?The vendor I bought my usb from said I could also edit the ' /boot/syslinux/syslinux.cfg' file with 'noimage' to make it permanent. No?Thanks again.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Yes, of course, you can use "noimage" too.
    http://knoppix.net/wiki/Cheat_Codes#Micro-Remastering

    And after this you can delete the file '/mnt-system/KNOPPIX/knoppix-data.img(or .aes) or, in case of partition overlay, the content of the overlay within the second partition.

    I hope, KK will correct the little error within his script in the next version of Knoppix.
    Last edited by Werner P. Schulz; 10-05-2013 at 11:39 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM picture

Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM

$99.99



Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP picture

Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP

$799.99



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord

$43.95



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$210.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$40.12



Juniper QFX5100-48T-AFO 48x 10Gb RJ45, 6x QSFP 40GE & Dual AC picture

Juniper QFX5100-48T-AFO 48x 10Gb RJ45, 6x QSFP 40GE & Dual AC

$699.00



Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord picture

Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord

$53.99



Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch picture

Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch

$999.00



Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P picture

Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P

$299.99



Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73 picture

Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73

$239.99