Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Video problem with 7.2.0

  1. #11
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    It is not obvious why your system freezes.
    Have you already tried the cheat codes 'no3d' or '3d'?

  2. #12
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    Thanks for your time Klaus.

    I have tried with cheat code 'knoppix no3d', the machine now stops during boot with error

    'grep: /etc/x11/xorg.conf: Input/output error

    I think, to avoid wasting your time, I will start from a fresh install and follow your instructions again to install the nVidia driver and see what happens.

    I should mention that I use the ADRIANE-KNOPPIX_V7.2.0g-CD-2013-07-28=EN ISO in case this has any bearing on the matter.

  3. #13
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    Here are some screenshots that I took yesterday, before installing the nVidia driver:

    Screenshot1.pngScreenshot2.pngScreenshot3.pngScreenshot4.png

  4. #14
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    So just to update this, I have done a fresh install of the 7.2.0 ISO onto two different USB sticks, just to rule out possible USB stick issues. Both installations have failed after a few minutes - the screen images deteriorate and the OS becomes unusable. I am now back to using a fresh install of 6.7.1 on one of these same USB sticks and it's been working fine for the last hour or so. Below are a couple of photos of what happens to the screen:

    IMG_0067.JPGIMG_0069.JPG

  5. #15
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    I still have not resolved this issue with my limited Linux experience. I have tested now three times with a fresh install, the results are as follows:

    Fresh install, no cheat codes, no additional drivers: Screen image deteriorates after a while (variable) and machine has to be rebooted.
    Fresh install, no cheat codes, appropriate nVidia drivers installed: Machine freezes after a short while and has to be rebooted.
    Fresh install, no3d cheat code: running fine, uptime several hours now.

    The no3d code is what Klaus suggested previously, I tried it after I'd already had some issues with the same install and it didn't work out. It seems to work fine when used with a fresh install.

  6. #16
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Did you ever tested the md5sum (=> Test the ISO) of your download and/or the integrity of your DVD/CD and of your flash install with the cheatcode "knoppix testcd"?

  7. #17
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    Quote Originally Posted by Werner P. Schulz View Post
    Did you ever tested the md5sum (=> Test the ISO) of your download and/or the integrity of your DVD/CD and of your flash install with the cheatcode "knoppix testcd"?
    I tested the md5sum after downloaf, it was good. I have just run cheatcode "knoppix testcd".the system reports "All files OK".

  8. #18
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    Also for further information: In the last few days I had the opportunity to test the following distros, some of which also gave problems with screen display on the same machine:

    Peppermint 4
    Ubuntu 12.04 screen also deteriorates, no solution found
    Bodhi 2.4
    Slax 7.0.8
    Porteus 2.1 screen also deteriorates, still trying to resolve it

    I think my best solution is to get another laptop without nVidia card

  9. #19
    Junior Member
    Join Date
    Feb 2013
    Posts
    28
    I found what appears to be the appropriate driver, but I have no idea how to install a .run file to the system or indeed whether it is likely to be compatible.

    http://www.nvidia.com/object/linux_d...100.14.09.html

    Can one of the more experienced members assist?

  10. #20
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Didn't you read "Step 3: Install"?

    Use the root-terminal, change with "cd" to the folder with your download and type "sh NVI" [TAB][ENTER]. [TAB] will autocomplete the packagename.

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES

$199.99



HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD picture

HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD

$249.99



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.19



Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001 picture

Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001

$149.99



Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears picture

Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears

$199.00



Supermicro 5018A-FTN4 Rack Server - Black picture

Supermicro 5018A-FTN4 Rack Server - Black

$125.00



SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture

SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD

$90.00



1U 20

1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME

$247.00