Results 1 to 2 of 2

Thread: Formatting a SDXC Card for use with Knoppix.

  1. #1

    Formatting a SDXC Card for use with Knoppix.

    Not a knoppix-specific issue, but I recently bought a 64GB SDxC card and attempted to format as ext2. Using fdisk to create a blank partition table and parted to create an ext2 partition using the entire card seemed to work, but both mount and pmount fail to mount the new partition, and my android-powered portable media player doesn't recognize that an SD card has been inserted. As mount suggested, I ran dmesg | tail the output of which is below: [ 244.604081] XFS (sdb1): Invalid superblock magic number [ 244.616517] XFS (sdb1): Invalid superblock magic number [ 244.641057] omfs: Invalid superblock (0) [ 244.649926] omfs: Invalid superblock (0) [ 244.659674] ntfs: (device sdb1): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 244.659694] ntfs: (device sdb1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 244.659708] ntfs: (device sdb1): ntfs_fill_super(): Not an NTFS volume. [ 244.668917] ntfs: (device sdb1): read_ntfs_boot_sector(): Primary boot sector is invalid. [ 244.668938] ntfs: (device sdb1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. [ 244.668951] ntfs: (device sdb1): ntfs_fill_super(): Not an NTFS volume. And I have no idea what that means. Any suggestions on how to resolve this? If it matters, the card is a PNY-brand and is identified as a generic mass storage device by fdisk and parted.

  2. #2
    Still have no idea what went wrong before(never had any trouble using parted to format external harddrives), but after figuring out what command to use to make a new empty partition in fdisk, I was able to use mkfs.vfat to format the card and now it's working in both my laptop's SD slot and my PMP's SD slot. So, problem solved.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping*

$25.00



NEW Sealed Original CISCO GLC-SX-MMD  SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO GLC-SX-MMD SFP TRANSCEIVER MODULE GBIC *US Shipping*

$14.00



NEW SEALED Original CISCO SFP-10G-SR TRANSCEIVER MODULE GBIC (US Shipping) picture

NEW SEALED Original CISCO SFP-10G-SR TRANSCEIVER MODULE GBIC (US Shipping)

$19.00



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



HP 1Gb SFP RJ-45 Module 453156-001 picture

HP 1Gb SFP RJ-45 Module 453156-001

$3.00



Genuine Cisco SFP-10G-SR  TRANSCEIVERS -   picture

Genuine Cisco SFP-10G-SR TRANSCEIVERS -

$8.48



New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF picture

New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF

$16.90



Genuine Cisco GLC-SX-MM 1G SFP Port Transceiver Module, 850nm - 30-1301-04 picture

Genuine Cisco GLC-SX-MM 1G SFP Port Transceiver Module, 850nm - 30-1301-04

$2.92