I've never had a problem with radeon 7000 cards...![]()
Runnig knoppix from a CD at boot time ,I'm getting the error :"No Suitable X-Server found for your card", I tried all possible cheats without success,how can I resolve this problem?
I guess the Radeon 7000 is the reason for this error.
Thanks for help.
sa
I've never had a problem with radeon 7000 cards...![]()
Hi stonent but I'm telling I hava problems with the Radeon 7000 card., and I'm still waiting for help.
sa
Well the card IS supported. It may be something else confusing it. Since you didn't give any other specs. I can't really give you much help![]()
Also what version of Knoppix are you using (date?) I've been trying to read people's minds for years but it never works.![]()
I'm using the last version 06.06.2003,I also tried all posssible cheats:ati,radeon,expert,vesa... with no results.what infos you still need I can give you.thanks
Are you using an ATI brand card or an ATI clone manufacturer such as Hercules etc.. ? Better yet, boot into text mode (knoppix 2) and do an lspci -n (paste the contents here, such as this
and then an lspci (like this):lspci -n
00:00.0 Class 0600: 1106:0601 (rev 05)
00:01.0 Class 0604: 1106:8601
00:07.0 Class 0601: 1106:0686 (rev 40)
00:07.1 Class 0101: 1106:0571 (rev 06)
00:07.2 Class 0c03: 1106:3038 (rev 1a)
00:07.3 Class 0c03: 1106:3038 (rev 1a)
00:07.4 Class 0680: 1106:3057 (rev 40)
00:07.5 Class 0401: 1106:3058 (rev 50)
00:08.0 Class 0200: 10ec:8139 (rev 10)
00:09.0 Class 0200: 10ec:8139 (rev 10)
00:0a.0 Class 0200: 10ec:8139 (rev 10)
01:00.0 Class 0300: 1023:8500 (rev 6a)
Or, ideally lspci -v (instead of lspci) it produces the irq data as well but is a lot more to copy.lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a)
Here are both dumps:
00:00.0 Class 0600: 8086:2560 (rev 02)
00:01.0 Class 0604: 8086:2561 (rev 02)
00:1d.0 Class 0c03: 8086:24c2 (rev 02)
00:1d.1 Class 0c03: 8086:24c4 (rev 02)
00:1d.2 Class 0c03: 8086:24c7 (rev 02)
00:1d.7 Class 0c03: 8086:24cd (rev 02)
00:1e.0 Class 0604: 8086:244e (rev 82)
00:1f.0 Class 0601: 8086:24c0 (rev 02)
00:1f.1 Class 0101: 8086:24cb (rev 02)
00:1f.5 Class 0401: 8086:24c5 (rev 02)
01:00.0 Class 0300: 1002:5159
02:05.0 Class 0200: 14e4:4401 (rev 01)
and:
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b2
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [6105]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ef000000-efefffff
Prefetchable memory behind bridge: eff00000-f7ffffff
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at b800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b400 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b000 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at ee800000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: ee000000-ee7fffff
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at f000 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b0
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at a800 [size=256]
I/O ports at a400 [size=64]
Memory at ed800000 (32-bit, non-prefetchable) [size=512]
Memory at ed000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Hightech Information System Ltd.: Unknown device 0f02
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d800 [size=256]
Memory at ef000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
02:05.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 80a8
Flags: bus master, fast devsel, latency 32, IRQ 10
Memory at ee000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
I hope you find what's wrong.
thanks
sa
have you tried knoppix fb800x600 or fb1024x768?
Also, I don't think your network card is supported straight off most of the knoppix CD's.
Another data point:
On a machine with one of these:
# lspci -n
01:00.0 Class 0300: 1002:5159
# lspci -v
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon 7000/Radeon VE
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
KNOPPIX correctly identifies the card, but uses the vesa server, producing an annoying 60Hz flicker. If I start knoppix with just xmodule=radeon, I get a refresh rate of 75Hz (this is with a monitor capable of 120Hz, BTW). I need to specify xmodule=radeon vsync=85 for optimal results.
Tested:
KNOPPIX V3.2 2003-07-26 EN
KNOPPIX V3.3 2003-09-24 EN
Drobo DR04D-U External Data Backup Storage Raid Hard Drive 4 Bay NAS USB
$42.50
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$140.79
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Glyph Technologies Glyph Studio RAID 36TB , 2-bay, USB 3, FW800 , eSATA USED
$800.00
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25