Check out the Cheat Codes for optional bootup switches.
http://knoppix.net/wiki/Cheat_Codes
I have a 64-bit processor on a Dell 9360 machine.
If I boot into Knoppix 8.2.0 Live from a portable drive and run simple queries as follows I get:
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32 bit,64 bit
Flags: ... lm ...
$ lshw -C processor | grep width
width: 64 bits
$ grep flags /proc/cpuinfo | grep " lm "
Flags: ... lm ...
which all confirm the 64-bit architecture. BUT the response
CPU op-mode(s): 32 bit,64 bit
apparently indicates that I am running a 64-bit-capable machine in 32-bit-mode.
Yes? - is this a true interpretation?
My /boot/isolinux/isolinux.cfg file contains the lines (omitting redundant qualifiers for ease of reading)
DEFAULT fergus
LABEL fergus
KERNEL ifcpu64.c32
APPEND knoppix64 -- knoppix
APPEND knoppix64
LABEL knoppix
KERNEL linux
APPEND initrd=minirt.gz
LABEL knoppix64
KERNEL linux64
APPEND initrd=minirt.gz
which I hoped meant "if 64-bit machine use 64-bit OS; if 32-bit machine use 32-bit OS" but apparently not.
How can I tweak the isolinux.cfg file to behave as required one line up?
Thank you!
PS1 I have to admit (I have only just noticed) that the file ifcpu64.c32 referred to above is very suggestive of an instruction "if 64-bit machine use 32-bit OS". Is that what it achieves, and the cause of the mismatch described?
PS2 I use this ifcpu file from the Knoppix 7.4.2 provision. I find the Knoppix 8.2.0 version stops Knoppix stone dead before it even starts. It simply does not work, at all. Anybody else?
Check out the Cheat Codes for optional bootup switches.
http://knoppix.net/wiki/Cheat_Codes
LOT QTY 2 of INTEL XEON 10 CORE E5-2690 V2 25MB 3.00GHZ CPU SR1A5
$139.99
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 2x256GB SSD Quadro K420 NO OS GA
$164.98
INTEL XEON GOLD 6136 PROCESSOR | 3.00GHZ | SR3B2
$69.99
E5-2699V4 Intel Xeon Processor 55M Cache, 2.20 GHz SR2JS CM8066002022506
$155.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.38
Intel SR1XD Xeon E5-2699V3 2.30Ghz 18-Core Socket 2011 CPU Processor Haswell
$35.00
Intel SR1A5 Xeon E5-2690 V2 LGA 2011/Socket R 3.0GHz Server CPU
$14.99
Intel Xeon E5-2640v4 2.4GHz 10-Core 25MB 90W SR2NZ
$5.45
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99