-
vaio laptop prob after install
hi all
i have installed knoppix on a vaio laptop PIII 866 512mo ram HD27go
i will list all my probs in one topic
1) the hd
on the init screen, it says the dma is assuming at 33mz
2) the keyboard
on caps lock mode, i can get the numbers to display 0->9, i have to hold the shift key to print the numbers
i have tryed all keyboards on the keyboard managers but i couldn't get it to work properly
3) The screen
i 'm blocked to 640x480 even i use the config manager and change to 600x800, it will reboot on the low resolution mode
i have changed the /etc/X11/XF86Config-4 file and add a # at each line with low resolution
but anyway
root@sony_vaio:/usr/src/kernel-source-2.6.3# mkxf86config
Video is (yet) unknown card, using XFree86(vesa) Server
Monitor is Generic Monitor, H:28.0-96.0kHz, V:50.0-75.0Hz
Using Modes "1024x768" "800x600" "640x480"
4) I have tryed to upgrade the kernel to 2.6.3 (on the vaio & a terminator box too)
i have tryed all tips on this forum and on the forum related links
i can't get make menuconfig to work
i have the asm/socket.h problem
strangely if i give the make command, it works and the term ask line by line the new config
then make menuconfig works
i take my .config file and move to /usr/src/linux and save
then
make-kpkg buildpackage -rev Custom.1 kernel_image gives the asm/socket.h error
and all commands trying to build give that error
i have seen it could be a knoppix kernel header prob so :
i tryed to change the headers but the os didn't let it => so i have removed the headers => lol
and now i can't get it back
thanks for reading all my probs, i prefered to put all in one topic
-
Senior Member
registered user
Well, I can answer what I can.
1) Put idebus=66 in the append="" line in /etc/lilo.conf.
2) Don't know about that one, My laptop keyboard won't let me switch to number lock mode either.
3) If your screen was good when booting knoppix from the cd, then boot to the cd, and copy the /etc/X11/xf86cong-4 file from the ramdisk to the chroot hd installation. That will fix it in a jiffy. If it doesn't, post back with more info about video card, or better yet, post results of lspci -vv > lspci.txt to here.
4) Others have reported similar problems and fix which has to do with the asm symlink pointing to the wrong asm architecture type for your hardware. In /usr/src/linux/include/asm should point to /usr/src/linux/include/asm-i386. Fix that by using the following commands:
Code:
cd /usr/src/linux/include
rm asm
ln -s /usr/src/linux/include/asm-i386 asm
Try running make xconfig again and it should work.
HTH,
Durand
Similar Threads
-
By lestat730 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 02-01-2005, 10:32 PM
-
By Zerro in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 11-28-2004, 02:58 PM
-
By DestroyerOfWorlds in forum General Support
Replies: 4
Last Post: 10-05-2004, 03:57 PM
-
By annamerikin in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 06-26-2003, 04:26 AM
-
By raypace in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 02-07-2003, 03:18 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Extron RGB-160XI Analog Computer Video 60-378-01
$187.06
Vintage 1960s Donner Model 3000 Analog Computer ~ MUSEUM PIECE Extremely Rare
$4000.00
NEC Multisync II JC-1402HMA VGA EGA CGA Analog TTL Computer Monitor Vintage 1988
$699.99
NEW Aquarius+ Computer Signature Edition - 8Bit Retro System
$239.00
Apple Macintosh SE/30 M5119 Computer 8MB RAM Recapped Working *See Description*
$450.00
Landen Computer. Circa 1898. the Rapid Computer Company. With Original Case.
$425.00
IBM Modem Saver Phone Line Tester
$7.99
Burr Brown Analog Computer parts Circuit boards w Helipot Potentiometers 1631a
$85.00
Sony Trinitron CPD-1304 9 PIN Analog Vintage CRT Monitor - Great for Retro PC
$475.30
Wooting Two HE Mechanical Keyboard Analog Linear Lekker Switches
$299.99