Hello, Dave.
What configuration of 7.6 are you using?
If it's a LiveDVD or a poor-man's install, you need persistence to keep your changes.
If you did an install to flash disk, that should be working.
When I boot Knoppix (7.6.0) I have to reset my time zone and wallpaper each time. Is there a remedy for this minor annoyance?
Hello, Dave.
What configuration of 7.6 are you using?
If it's a LiveDVD or a poor-man's install, you need persistence to keep your changes.
If you did an install to flash disk, that should be working.
I made a HD install from the live DVD. It's a reiser partition, 19G, of which I seem to be using 13G at the moment. I tried unsuccessfully to install to a flash disk, maybe unsuccessful because the disk was a cheap generic kind and somehow didn't boot.
See at http://knopper.net/knoppix/knoppix760-en.html
→ Update: Computers without DVD drive
how to do a Flash install without burning the DVD. But first of all check your download
http://knoppix.net/wiki/Cheat_Codes → Check the ISO
Thanks again. I see what my problem was with the flash (I had a fat32 format on the drive). I still don't understand why the boot is incomplete, however. I'll check the iso for accuracy.
Hello again, Dave.
The Knoppix 7.6 LiveDVD iso itself is slightly too big for fat32.
The iso itself must be saved on a filesystem like ntfs or linux to begin with, not fat32.
The LiveUSB itself should be fat32 formatted initially.
A safe way to proceed is to actually to make a LiveDVD and then 'install to flash disk'
from the LiveDVD to make a LiveUSB with persistence.
HTH
New Juniper MX204 Router MX204-HW-BASE Junos-64 Dual AC Power
$8750.00
Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC
$1784.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch
$130.00
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00