Hello, Dave.
What configuration of 7.6 are you using?
If it's a LiveDVD or a poor-man's install, you need persistence to keep your changes.
If you did an install to flash disk, that should be working.
When I boot Knoppix (7.6.0) I have to reset my time zone and wallpaper each time. Is there a remedy for this minor annoyance?
Hello, Dave.
What configuration of 7.6 are you using?
If it's a LiveDVD or a poor-man's install, you need persistence to keep your changes.
If you did an install to flash disk, that should be working.
I made a HD install from the live DVD. It's a reiser partition, 19G, of which I seem to be using 13G at the moment. I tried unsuccessfully to install to a flash disk, maybe unsuccessful because the disk was a cheap generic kind and somehow didn't boot.
See at http://knopper.net/knoppix/knoppix760-en.html
→ Update: Computers without DVD drive
how to do a Flash install without burning the DVD. But first of all check your download
http://knoppix.net/wiki/Cheat_Codes → Check the ISO
Thanks again. I see what my problem was with the flash (I had a fat32 format on the drive). I still don't understand why the boot is incomplete, however. I'll check the iso for accuracy.
Hello again, Dave.
The Knoppix 7.6 LiveDVD iso itself is slightly too big for fat32.
The iso itself must be saved on a filesystem like ntfs or linux to begin with, not fat32.
The LiveUSB itself should be fat32 formatted initially.
A safe way to proceed is to actually to make a LiveDVD and then 'install to flash disk'
from the LiveDVD to make a LiveUSB with persistence.
HTH
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$65.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$10.99
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1)
$39.95
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
New Cisco w/ Green Hologram SFP-10G-LR-S 10G SFP+ LR 1310nm 10km SMF LC Module
$34.99
New Cisco w/ Green Hologram GLC-TE 1G SFP Copper RJ45 100m Module
$29.99