Results 1 to 6 of 6

Thread: Does Not Save Settings

  1. #1
    Junior Member
    Join Date
    Dec 2004
    Location
    New York
    Posts
    9

    Does Not Save Settings

    When I boot Knoppix (7.6.0) I have to reset my time zone and wallpaper each time. Is there a remedy for this minor annoyance?

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Hello, Dave.
    What configuration of 7.6 are you using?
    If it's a LiveDVD or a poor-man's install, you need persistence to keep your changes.
    If you did an install to flash disk, that should be working.

  3. #3
    Junior Member
    Join Date
    Dec 2004
    Location
    New York
    Posts
    9
    I made a HD install from the live DVD. It's a reiser partition, 19G, of which I seem to be using 13G at the moment. I tried unsuccessfully to install to a flash disk, maybe unsuccessful because the disk was a cheap generic kind and somehow didn't boot.

  4. #4
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    See at http://knopper.net/knoppix/knoppix760-en.html
    → Update: Computers without DVD drive
    how to do a Flash install without burning the DVD. But first of all check your download
    http://knoppix.net/wiki/Cheat_Codes → Check the ISO

  5. #5
    Junior Member
    Join Date
    Dec 2004
    Location
    New York
    Posts
    9
    Thanks again. I see what my problem was with the flash (I had a fat32 format on the drive). I still don't understand why the boot is incomplete, however. I'll check the iso for accuracy.

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by davec51 View Post
    (I had a fat32 format on the drive). I still don't understand why the boot is incomplete, however. I'll check the iso for accuracy.
    Hello again, Dave.

    The Knoppix 7.6 LiveDVD iso itself is slightly too big for fat32.
    The iso itself must be saved on a filesystem like ntfs or linux to begin with, not fat32.

    The LiveUSB itself should be fat32 formatted initially.
    A safe way to proceed is to actually to make a LiveDVD and then 'install to flash disk'
    from the LiveDVD to make a LiveUSB with persistence.

    HTH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module picture

Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module

$17.99



Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers picture

Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers

$19.00



Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module picture

Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module

$24.99



Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF picture

Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF

$29.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02 picture

SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02

$5.00



Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC picture

Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC

$13.89



10Gbps 10GB SFP+SR transceiver for UniFi Switch 16 XG 16port Ubiquiti US-16-XG picture

10Gbps 10GB SFP+SR transceiver for UniFi Switch 16 XG 16port Ubiquiti US-16-XG

$10.99



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00



New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module picture

New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module

$49.99