-
-
ok it boot's
tryed to install nvidia driver get the nvidia-logo but kdm crash get a black box .. Is ther a modul to unload or samthing else
Same thing like riva??? placholder for me my dmseg
dmesg
Linux version 2.4.27 (root@Koffer) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 SMP Mo Aug 9 00:39:37 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
319MB LOWMEM available.
On node 0 totalpages: 81904
zone(0): 4096 pages.
zone(1): 77808 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Kernel command line: BOOT_IMAGE=Linux(2.4)-1 ro root=302 ramdisk_size=100000 lang=fr noscsi noapm nodhcp
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 334.095 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 666.82 BogoMIPS
Memory: 317376k/327616k available (1406k kernel code, 9856k reserved, 574k data, 144k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU0: Intel Celeron (Mendocino) stepping 00
per-CPU timeslice cutoff: 365.52 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 334.0777 MHz.
..... host bus clock speed is 66.8155 MHz.
cpu: 0, clocks: 668155, slice: 334077
CPU0<T0:668144,T1:334064,D:3,S:334077,C:668155>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
hda: Maxtor 91080D5, ATA DISK drive
hdc: CD-RW CR52, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 21095424 sectors (10801 MB) w/512KiB Cache, CHS=2616/128/63
Partition check:
hda: hda1 hda2 hda3 hda4
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
libata version 1.02 loaded.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 3276
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3404k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 144k freed
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
blk: queue c03661a0, I/O limit 4095Mb (mask 0xffffffff)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 524152k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MSI Model: CD-RW CR52 Rev: 3.70
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:50:50 Aug 9 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Real Time Clock Driver v1.10f
hub.c: new USB device 00:07.2-2, assigned address 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Serial driver version 5.05c (2001-07-0 with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
hub.c: new USB device 00:07.2-2.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x2770/0x9120) is not claimed by any active driver.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
hub.c: new USB device 00:07.2-2.2, assigned address 4
usb-uhci.c: interrupt, status 2, frame# 1696
usb.c: USB device not accepting new address=4 (error=-110)
PPP BSD Compression module registered
PPP Deflate Compression module registered
hub.c: new USB device 00:07.2-2.2, assigned address 5
usb.c: USB device 5 (vend/prod 0x66f/0x4200) is not claimed by any active driver.
parport0: PC-style at 0x378 (0x77 [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, EPSON Stylus COLOR 640
lp0: using parport0 (polling).
lp0: console ready
hub.c: new USB device 00:07.2-2.4, assigned address 6
input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb1:6.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 4.13 detected OK (220)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
device ppp0 entered promiscuous mode
device ppp0 left promiscuous mode
franz@meinpc:~$
Similar Threads
-
By init1 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-01-2006, 08:04 PM
-
By metavoid in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 09-08-2004, 09:45 AM
-
By ldp in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 06-17-2004, 08:21 AM
-
By dou01553 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 06-14-2004, 10:06 PM
-
By dou01553 in forum General Support
Replies: 1
Last Post: 06-14-2004, 02:21 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Handheld Cordless Car Vacuum: 14000PA High Power, Lightweight, Black
$36.79
Electric Vacuum Cleaner Air Duster Suction High Pressure for Computer Car Home
$9.97
Compressed Air Duster with Air Blower 100000RPM Vacuum Cleaner and Air Duster
$38.99
Electric Mini Air Duster Blower Vacuum Cleaner for PC Computer Laptop Dust
$30.95
Mini Computer Vacuum USB Keyboard Cleaner PC Laptop Brush Dust Cleaning Kit US
$11.29
Electric Vacuum Cleaner Air Duster Suction High Pressure for Computer Car Home
$10.87
3in1 Handheld Vacuum Keyboard Cleaner Dust Cleaning Laptop Desktop PC Computer
$18.59
KLIM Cool Laptop Cooler Fan, Portable Quiet Cooling Vacuum w/Display - BLUE LED
$15.95
Duster Cleaner Blower & Vacuum Rechargeable
$79.99
2-In-1 Air Duster & Vacuum 60000 RPM Rechargeable Auto Computer Keyboard USB
$26.95