I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
I'm newbie for Linux and Dial Up user..
I've tried to configure my internal 56K modem (ActionTec V.90 PCI Modem) via the modem-assistant. I know my modem not winmodem, it's hardware modem And It use COM PORT=3, IRQ=9 on WinXP)
However it can't find with S2.. I get an answer from the modem on S1 but empty ATI Values.
Anyway, if I dial, the modem stops on "initializing modem".
What's the Problem?
And what can i do?
Thanks in advance..
I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
FarAway- as root do this:
setserial /dev/ttyS3 irq 9
ln /dev/ttyS3 /dev/modem
Then configure kppp
Amiga 4000TX computer motherboard
$2643.23
Amiga 1200 Computer * Recapped * TF1230/55 * 64GB* 160GB
$949.00
Amiga OS Operating System v3.1 Install Disks for Commodore Amiga
$38.98
Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200
$37.32
TF1232: a 25MHz 68030 Amiga 1200 accelerator with 64MB RAM and FPU option
$138.11
Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek
$65.00
TF1260 including 68LC060 CPU, accelerator card for the Amiga 1200, 128MB Ram
$320.79
TF536: an Amiga 500 accelerator with 68030/50, 64MB RAM, IDE interface+CF card
$211.18
TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network
$65.00
pi1541 Disk Emulator for Commodore -
$38.95