Results 1 to 7 of 7

Thread: Disaster prevention.

  1. #1
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    Disaster prevention.

    .
    I think there is a need for some built-in protection in Knoppix 6.7
    to prevent the ruination of LiveUSBs that have been given a task that
    turns out to be catastrophic.

    What I have in mind is the bad result which occurs after starting a
    download that proves ultimately too large for the LiveUSB to accommodate.
    This ultimately fails, but also renders the LiveUSB inoperable without
    extensive repairs or re-installation.

    Couldn't there be some built-in surveillance to monitor for this
    condition and head it off with some timely warning or corrective action?

    Training the operator and/or using a larger USB are not solutions of interest.

  2. #2
    Junior Member
    Join Date
    Jun 2011
    Posts
    23
    Quote Originally Posted by utu View Post
    .
    What I have in mind is the bad result which occurs after starting a
    download that proves ultimately too large for the LiveUSB to accommodate.
    This ultimately fails, but also renders the LiveUSB inoperable without
    extensive repairs or re-installation.
    Could you be a little more elaborative.
    Does this mean that when download is done diretly on disk or on persistent image?

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @ vkrishn

    For example:
    I now have about 400 MB unused on my LiveUSB with persistence.

    If I were to initiate a 700 MB download, that would proceed
    until the device was 'full' at which time I would get a
    warning 'no more room on the device'.

    At this point the LiveUSB is corrupted and will not reboot
    after shutdown. I think some some protection against this condition
    is in order.

    The few work-arounds I've tried are all harder than simply
    re-installing from a previously arranged clone copy of the LiveUSB.

  4. #4
    Junior Member
    Join Date
    Jun 2011
    Posts
    23
    I guess that means using the space on disk directly and not inside the persistent storage.
    The reason I asked, I have few usb installation wanted to be careful.

    Did you try installing Knoppix in one partition of the disk and persistent/downloads on another partition, to see if the problem still exists?

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Here are two ideas:

    1. One could change IceWeasel's Edit>Preferences>General>Downloads
    FROM: 'Save files to {/home/knoppix/Downloads}'
    TO: 'Always ask always ask me where ...'

    2. If there is a 'good' answer to 'where' then one might change the
    default to that, instead of 'ask me where'.

    Leaving IceWeasel set to its download default is asking for trouble
    for those downloading into OS media of relatively limited size.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    At this point the LiveUSB is corrupted and will not reboot
    after shutdown.
    And you cannot reboot with cheatcode "knoppix noimage"? Of course your persistent memory is damaged, but you can use your backup.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Thanks, Werner.

    The 'noimage' approach is one means of RECOVERY that I've used.
    What I was searching for here is a means of PREVENTION.

    What with the cost of USBs coming down, there's not much
    justification anymore for 2 Gb installs like I've championed up to now.

    My favorite current configuration is a 16 Gb USB with 2 GB partition
    and the remainder formatted ext3 with kn-recombine on it.
    I can just as well shift downloads to that partition and not run
    into the 'disasters' anymore.

    Cheers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Amiga 4000TX computer motherboard picture

Amiga 4000TX computer motherboard

$2643.23



Amiga 1200 Computer * Recapped *  TF1230/55 * 64GB*  160GB picture

Amiga 1200 Computer * Recapped * TF1230/55 * 64GB* 160GB

$949.00



TF1232: a 25MHz 68030 Amiga 1200 accelerator with 64MB RAM and FPU option picture

TF1232: a 25MHz 68030 Amiga 1200 accelerator with 64MB RAM and FPU option

$138.11



Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200 picture

Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200

$37.32



TF1260 including 68LC060 CPU, accelerator card for the Amiga 1200, 128MB Ram picture

TF1260 including 68LC060 CPU, accelerator card for the Amiga 1200, 128MB Ram

$320.79



TF536: an Amiga 500 accelerator with 68030/50, 64MB RAM, IDE interface+CF card picture

TF536: an Amiga 500 accelerator with 68030/50, 64MB RAM, IDE interface+CF card

$211.18



Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek picture

Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek

$65.00



Amiga OS Operating System v3.1 Install Disks for Commodore Amiga picture

Amiga OS Operating System v3.1 Install Disks for Commodore Amiga

$38.98



TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network picture

TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network

$65.00



pi1541 Disk Emulator for Commodore -  picture

pi1541 Disk Emulator for Commodore -

$38.95