-
Freezes at init 5.
I have a Dell Latitude Laptop that I have been running Zorin (Ubuntu derivitive) on. I just installed Knoppix from Flash drive and it went well and I was able to boot yesterday. I now booted up today and I get to where it says INIT: Entering runlevel: 5 and freezes. I am sitting at the root@Microknoppix:/#_ the underscore blinks for a few mins then stops and now I'm frozen.
Any help would be greatly appreciated.
Thanks
-
Have a look at "Check the ISO" and also try the cheatcode "knoppix testcd"
-
It;s installed on the hard drive. booted it two or three times then the next morning it wouldn't boot.
-
Ok, but what is about "check the ISO" and "knoppix testcd" with the Knoppix DVD/CD you've downloaded and used for HD installation? And what type of installation have you done: "HD Install" or "Flash Install to HD"?
Last edited by Werner P. Schulz; 05-09-2013 at 05:48 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00