Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
I'm using v7.4.2 in a pendrive made with flash-knoppix. After typing knoppix lang=es and entering the password only a black screen is shown. Same behaviour with keyboard=es.
Is there some workaround for this?
Thanks,
Eduardo
Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
After telling
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
a few minutes later the OS shows a black screen and gives no other sign of being alive. It no even asks for a password.
It looks like a hardware error. Did you test RAM with the cheatcode "memtest" (not "knoppix memtest") for some hours?
Will use another netbook, same model, and then I'll tell you. But cheatcodes worked fine with v7.2...
Now I used both netbooks, but kept watching the screen:
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
ALL FILES OK
...
The graphical environment...
And then the black screen.
Can you switch to a console using [Ctrl Alt F2] and see anything? If so, typeand try some of the other cheatcodes to find a solution for your graphic chip. "memtest" had no errors?Code:su reboot
The OS does not respond to Ctrl Alt F2.
Will run memtest tonight.
Thanks, Werner.
After a time far from Knoppix because of a Synaptic problem, I’m using it again as my main OS.
When I enter cheat codes "knoppix keyboard=es xkeyboard=es" Spanish keyboatd works fine, but with
LABEL knoppix
KERNEL linux
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
in /mnt-system/boot/syslinux/syslinux.cfg
it doesn’t.
Is this the file I have to edit?
Thanks.
Which Knoppix version? Which installation - "Flash disk install" or "HD install"?
Have also a look at the end of Cheat Codes → Micro-Remastering.
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$37.11
Juniper EX4300-48P 48 Port PoE Gigabit Network Switch - COMES WITH DUAL POWER
$325.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$168.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
JUNIPER QFX5100-48S-AFO 48-Port SFP/SFP+10GbE 6x40GBE QSFP+ DUAL AC PS
$625.00
Juniper EX4200-48PX 48-PORT 10/100/1000BASET PoE Ethernet Switch
$43.19
Juniper EX2200-C-12T-2G 12-Port 10/100/1000 2x SFP Uplinks Compact Switch
$89.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch
$59.99
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch with RACK EARS, RESET
$46.99