Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
I'm using v7.4.2 in a pendrive made with flash-knoppix. After typing knoppix lang=es and entering the password only a black screen is shown. Same behaviour with keyboard=es.
Is there some workaround for this?
Thanks,
Eduardo
Are there error messages using the cheatcode "knoppix testcd noimage" (omit "lang=es")?
After telling
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
a few minutes later the OS shows a black screen and gives no other sign of being alive. It no even asks for a password.
It looks like a hardware error. Did you test RAM with the cheatcode "memtest" (not "knoppix memtest") for some hours?
Will use another netbook, same model, and then I'll tell you. But cheatcodes worked fine with v7.2...
Now I used both netbooks, but kept watching the screen:
Knoppix 7.4 found at: /dev/sdb1
Checking Knoppix/Knoppix...
ALL FILES OK
...
The graphical environment...
And then the black screen.
Can you switch to a console using [Ctrl Alt F2] and see anything? If so, typeand try some of the other cheatcodes to find a solution for your graphic chip. "memtest" had no errors?Code:su reboot
The OS does not respond to Ctrl Alt F2.
Will run memtest tonight.
Thanks, Werner.
After a time far from Knoppix because of a Synaptic problem, I’m using it again as my main OS.
When I enter cheat codes "knoppix keyboard=es xkeyboard=es" Spanish keyboatd works fine, but with
LABEL knoppix
KERNEL linux
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
in /mnt-system/boot/syslinux/syslinux.cfg
it doesn’t.
Is this the file I have to edit?
Thanks.
Which Knoppix version? Which installation - "Flash disk install" or "HD install"?
Have also a look at the end of Cheat Codes → Micro-Remastering.
Dell EMC PowerEdge R7615 Server AMD 9224 24C 192GB DDR5, 2x 480GB + 10x 14TB HDD
$6949.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.00
Genuine HP ProLiant MicroServer Gen8 Intel Pentium G2020T 2.5GHz 712318-001
$199.95
SuperMicro Scale CSE-813M Xeon E5-2620 v4 128 GB DDR4 1U Server No Drives/No OS
$219.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Genuine HP ProLiant MicroServer Gen8 without the part on the front w power cord
$185.92
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVESorCads
$200.00
CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD
$119.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00