Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Commodore 1750 512KB RAM Expansion
$260.00
Vintage Commodore 1571 Floppy Disk Drive
$125.00
vintage Commodore 1571 Floppy Disk Drive (powers on)
$140.00
RARE - CP/M Z80 Commodore 64 Cartridge, Disk, Box, Manual and book
$190.00
Commodore VIC-20 1110 Computer 8K Ram Cartridge in Box w Instructions Vintage
$69.95
Professionally restored & fully recapped Commodore 64 computer | NTSC C64
$299.00
5 five and a quarter inch floppy disks Commodore format NIB
$17.95
Commodore 64 commodore 128 commodore 1541-2, 1581 Power Switch | c64 c64c
$4.99
TeensyROM Cartridge for Commodore 64/128: MIDI, Fastload, Emulation, and Network
$65.00
**Commodore 64K Computer W/Original Box/Power Supply/Chords (64K Memory Plus)**
$149.41